MT-EL-HLF59R is a one part, 100 % solids, epoxy powder coating for insulation of wire and busbars. Designed for electrostatic spray application it has excellent resistance against heat, chemicals and moisture. The coating has a good edge coverage and flexibility. It is serviceable up to 130° C.
| 標準値 | 方法 | |
| バインダーシステム | エポキシ樹脂 | |
| 密度 | 1.75～1.85g/cm³ | ISO-8130 2 |
| Gel time at 200° C | 30 – 50 sec. | modified ISO 8130-6 |
| 保存安定性 | 6 months from date of manufacture at ≤ 23° C | |
| 予熱温度 | 190 – 235° C object temperature | |
| Post cure conditions | 5 – 10 min. at above temperature | |
| 粒度分布 | < 32 µm = 25 – 40 % < 160 µm > 99.5 % | Malvern ISO 8130-1 |
| 色圏 | grey, ca. RAL 7047 | |
| 推奨フィルム厚 | 200 - 300μm | |
| Flow | スムーズ | |
| Gloss at 60° angle | 40〜60ユニット | ISO 2813 |
| Cross cut | GT0 | ISO 2409 |
| 耐衝撃性 | > 5 Joule | DIN 3476-1 |
| 伸長 | > 5％ | DIN 3476-1 |
| 硬度 | > 100 | ISO 2815 |
| 鉛筆硬度 | 5 H | EN-13523 4 |
| ガラス転移温度 | 65 ± 7° C (Tg1) 112 ± 5° C (Tg2) 40 – 60 J/g (Delta H) | ISO 11357-2 Inflection point Inflection point |
| 温度指数 | 130° C (Class B) | IEC 60216-1 |
| 吸水 (40 h / 23° C) | <1％ | ASTM D 570 |
| 熱伝導率 | 0.4～0.5W/(m・K) | EN 821 |
| Specific surface resistivity | > 1013Ω | IEC 60093 |
| 絶縁耐力 | 45 kV / mm | IEC 60243-1 |
| Dissipation factor tan δ, 25° C Dissipation factor tan δ, 105° C | <0.01 <0.01 | ASTM D 150 ASTM D 150 |
| Dielectric constant (100 Hz – 1 MHZ) | 4.0 | ASTM D 149 |
| Comparative tracking index (CTI) | CTI 600 / CTI 175M-1.1 | IEC 60112 |
| UL 94 垂直燃焼試験 | V-0 | IEC 60695-11-10 |
| Hot wire ignition (HWI) | ≥ 120 sec. | IEC 60695-2-20 |
| High current arc ignition (HAI) | ≥150 | UL 746A Section 32 |
For help with solutions customized to your business needs, contact Export Director now.
Export Director
With 20+ years of experience and We firmly believe that product quality is the basis of cooperation.
Send Inquiry
TEl
+86-21-6420 0566
