MT-300 AM is a series of polyester resin based thermo-setting powder coatings formulated using TGIC. The pigments used in the MT-300 series restrict the field of application of this powder coatings class to interior uses. MT-300 is designed for interior decoration such as, metal furniture, shop fittings, shelves, light fittings. MT-300 AM is a high-quality powder coating designed to meet decorative and functional demands of your specifications. Test results have proven reduction of bacteria and mold up to 99.9%.
| 化学タイプ | Polyester TGIC |
| 粒径 | 静電噴霧に適しています |
| 比重 | 色と効果に応じて1.2～1.95 g/cm³ |
| Storage | 25℃以下の乾燥した涼しい環境（開封した箱は再封が必要です） |
| 貯蔵寿命 | 12か月間 |
| Stoving Conditions （物体温度にて） | 12 to 24 minutes at 180°C 8 to 16 minutes at 200°C 4 to 10 minutes at 210°C |
| スムーズ | 微細構造 | 粗い質感 | ||
| 柔軟性（円筒形マンドレル） | ISO 6860 | 6mmを通過 | 5mmを通過 | 5mmを通過 |
| 接着 | ISO 2409（2mmクロスハッチ） | GT0 | GT0 | GT0 |
| エリクセンカッピング | ISO 1520 | 6mmを通過 | 6mmを通過 | 6mmを通過 |
| 影響 | ISO6272（1993） | 50kgcm | 50kgcm | 50kgcm |
Aluminium, steel or Zintec surfaces to be coated must be clean and free from grease. Iron phosphate and particularly lightweight zinc phosphating of ferrous metals improves corrosion resistance. Aluminium substrates may require a chromate conversion coating, chrome free pre-treatment or flash anodizing for certain applications. Galvanised steel may require zinc or chromate conversion or sweep blasting. Detailed advice should be sought from the pre-treatment supplier.
MT-300 powder coatings can be applied by corona electrostatic or tribostatic equipment. However the aspect obtained by tribo-static equipment may vary when compared to electrostatic application and/or our colour card. In all application processes the aspect obtained is subject to variation, depending on the method of application (type of gun, nozzle, etc) and the shape/type of component. We recommend that the actual application parameters are adapted and adjusted depending on the type of component and with each powder batch in order to give a finish in accordance with our colour card. The following procedure is given as a guideline when using these finishes. We recommend the use of flat jet spray nozzles. To ensure powder homogeneity, the complete content of the boxes should be emptied completely into the feed hopper. For manual application it is essential to ensure that an even film thickness is applied and in all Instances sinusoidal gun movements should be avoided.
For help with solutions customized to your business needs, contact Export Director now.
Export Director
With 20+ years of experience and We firmly believe that product quality is the basis of cooperation.
Send Inquiry
TEl
+86-21-6420 0566
