Made of polyester resin and acrylic resin as the main raw materials
–Smooth and delicate surface, good hand feel
—Good adhesion and good impact resistance
—Excellent weather resistance
—Outdoor lighting, outdoor furniture, aluminum ceilings, aluminum profiles, etc.
—Can be made into a variety of low-gloss and colorful colors, the specific gloss color is subject to user requirements
—Good anti-yellowing property
Curing time: 200℃×10–15 minutes
Spraying method: High-voltage electrostatic spraying 60-80 KV
Recommended film thickness: 60-80 um
| Performance Category | Performance Parameter | Possible Specification | Test Method |
|---|---|---|---|
| Physical Properties | Pencil Hardness | High (e.g., ≥H) | ASTM D3363 |
| Impact Resistance | ≥50 kg·cm | GB/T 1732 | |
| Flexibility | ≤2mm | GB/T 6742 | |
| Adhesion | Excellent (0 – 1 grade) | ISO 2409 | |
| Gloss Level | Adjustable (matte to high-gloss) | – | |
| Color Retention | Excellent, not easy to fade | – | |
| Chemical Properties | Weather Resistance | Excellent, can withstand long-term UV and humidity exposure | GB/T 1865 |
| Chemical Resistance (Acid) | Good resistance to 5% H₂SO₄ for 240 hours | – | |
| Chemical Resistance (Alkali) | Good resistance to 5% NaOH for 168 hours | – | |
| Solvent Resistance | Good resistance to common solvents | – | |
| Corrosion Resistance | Average, suitable for inland atmospheric environments with low decorative effect requirements and requirements for light retention, color retention, and rust prevention coatings | GB/T 1771 | |
| Environmental and Safety Properties | VOC Emission | Zero VOC emissions | – |
| Flammability | Combustible, keep away from open flames and high-temperature sources | – |
The above tests all use 0.8mm degreased and rusted cold-rolled steel plates, the coating thickness is 40-80um, and the performance indicators of the coating will vary slightly with the gloss.
This product does not contain arsenic, selenium, lead, hexavalent chromium, mercury, antimony, cadmium, and other heavy metals, and complies with RoHS requirements.
Storage conditions: Store in a dry, ventilated room at around 25°C, avoid direct sunlight. Under this condition, the powder can be stored for 6-12 months. If it exceeds the expiration date, it can be re-tested. If the results meet the requirements, it can still be used.
Powder coatings can be categorized by resin system (epoxy, polyester, hybrid, polyurethane), appearance (smooth, texture, hammer, metallic, pearlescent), or performance level (anti-corrosion, heat-resistant, UV-resistant, architectural grade, automotive grade).
Powder coatings offer thousands of colors in gloss, matte, satin, metallic, candy, texture, wrinkle, hammer tone, wood grain, fluorescent, and other custom effects. Special powders can create soft-touch, anti-scratch, anti-fingerprint, or anti-graffiti surfaces.
The process generally includes surface pretreatment (degreasing, phosphating, chromating, sandblasting), drying, electrostatic spraying, curing in an oven, and cooling. A well-controlled pretreatment and curing process ensures strong adhesion and long service life.
Powder coatings are environmentally friendly, solvent-free, and produce minimal waste. They offer excellent corrosion resistance, weather durability, mechanical strength, and uniform film appearance. The coating is tough, impact-resistant, scratch-resistant, and has a long lifespan.
Powder coatings are widely used in appliances, aluminum profiles, architectural components, automotive parts, bicycles, furniture, outdoor equipment, machinery, electrical cabinets, pipeline systems, and general industrial and consumer goods.
Powder coating is a dry finishing technology where finely ground powder is electrostatically sprayed onto a metal or non-metal surface and then cured at high temperature. After curing, the powder melts into a continuous, durable, and decorative coating layer.
Powder coating protects the substrate from corrosion, weathering, chemical attack, and mechanical wear. It also provides decorative appearance with rich colors, gloss levels, textures, and special effects.
In many industrial applications, powder coating outperforms liquid paint. It forms a thicker and tougher coating, resists corrosion and chemicals better, and does not contain VOCs. It also provides excellent consistency and cost-effective mass production.
It is called powder coating because the coating material is a solid powder instead of a liquid paint. The coating is formed by melting and curing powder particles under heat.
Powder coatings include several families depending on resin chemistry:
• Epoxy powders
• Polyester powders
• Epoxy-polyester hybrid powders
• Polyurethane powders
• Acrylic powders
• Fluorocarbon (PVDF) powders
Each type has its own performance features such as corrosion resistance, UV resistance, chemical resistance, outdoor durability, or decorative properties.
Powder coatings are based on thermoset or thermoplastic resins combined with pigments, curing agents, fillers, additives, and in some cases metallic or effect particles. Common substrates include steel, aluminum, galvanized metal, MDF, and certain heat-resistant plastics.
The lifespan depends on powder type, film thickness, application method, pretreatment, and service environment. Indoor coatings can last more than 10–20 years. High-grade outdoor polyester or fluorocarbon powders can last 15–25 years or longer under UV exposure.
For help with solutions customized to your business needs, contact Export Director now.
Export Director
With 20+ years of experience and We firmly believe that product quality is the basis of cooperation.
Send Inquiry
TEl
+86-21-6420 0566
