This series of products is made of polyester resin and hardener, and is made of high transparency materials.
Excellent gloss and vividness, the coating is crystal clear;
High transparency and image clarity, accurately reflecting the base color;
Excellent leveling, highly smooth coating surface;
Long-term durability in harsh outdoor environments, maintaining the original color of the coating;
Good matching with a variety of paints and color powder coatings.
1. Designed for surface finishing of die-cast aluminum wheels, with ultra-high transparency and standard transparency;
2. Suitable as a high-performance finishing coating for various metal appliances, such as furniture metal tripods, bicycles, locks, door handles;
3. Suitable as a finishing protective layer for metal powder coatings
Carton packaging, lined with two layers of polyvinyl chloride plastic bags, net weight of each box 20kg. Non-hazardous items can be transported in various ways, but should be kept away from direct sunlight, moisture and heat, and contact with chemicals.
Operators should wear anti-sit masks during use to avoid inhaling dust and minimize long-term contact between skin and powder coating. Paint attached to the skin can be washed with soap.
| Specific gravity | 1.2~1.8g/cm |
| Particle size | Depending on the application, the standard type has an average particle size of 35~40 microns, less than 10 microns of powder <10%, more than 100 microns of powder <0.5%. |
| Storage stability | Polyester powder coatings should be stored in a dry, ventilated room below 35°C, and avoid direct sunlight. If stored in an air-conditioned room, the powder must be stored at room temperature or the same (temperature) as the spraying equipment before use to avoid moisture. Under this condition, the powder can be stably stored for more than 12 months. If it is exceeded, it must be re-tested. If the result meets the requirements, it can still be used. |
| Test items | Inspection standard or method | Inspection index |
| Appearance | Visual inspection | Various board surface effects |
| Impact | GB/T 1732 | ≥50Kg·cm |
| Bending | GB/T 6742 | ≤2mm |
| Cupping | GB/T 9753 | ≥8mm |
| Hardness | GB/T 6739 | ≥H~2H |
| Adhesion | GB/T 9286 | Level 0 |
| Neutral salt spray resistance | GB/T 1771 | 500h; Scribed area: unidirectional rust ≤2.0mm; Unscribed area: no abnormality |
| Moisture and heat resistance | GB/T 1740 | 500h No abnormality |
| Artificial weather aging resistance | GB/T 1865 | 800h; Discoloration ≤2 level; Gloss loss ≤2 level |
| The above coating performance indicators may decrease slightly as the gloss decreases. | ||
| Spraying | This series of products can be suitable for the following spraying methods: corona electrostatic spraying; friction electrostatic spraying; electrostatic fluidized bed spraying; fluidized bed hot dip coating. | |
| Coating thickness: between 40 and 150 microns, depending on the application requirements. | ||
| Curing conditions | Recommended 200℃/10 minutes, can also be designed according to user needs: 160℃/20 minutes, 180℃/10 minutes | |
Powder coatings can be categorized by resin system (epoxy, polyester, hybrid, polyurethane), appearance (smooth, texture, hammer, metallic, pearlescent), or performance level (anti-corrosion, heat-resistant, UV-resistant, architectural grade, automotive grade).
Powder coatings offer thousands of colors in gloss, matte, satin, metallic, candy, texture, wrinkle, hammer tone, wood grain, fluorescent, and other custom effects. Special powders can create soft-touch, anti-scratch, anti-fingerprint, or anti-graffiti surfaces.
The process generally includes surface pretreatment (degreasing, phosphating, chromating, sandblasting), drying, electrostatic spraying, curing in an oven, and cooling. A well-controlled pretreatment and curing process ensures strong adhesion and long service life.
Powder coatings are environmentally friendly, solvent-free, and produce minimal waste. They offer excellent corrosion resistance, weather durability, mechanical strength, and uniform film appearance. The coating is tough, impact-resistant, scratch-resistant, and has a long lifespan.
Powder coatings are widely used in appliances, aluminum profiles, architectural components, automotive parts, bicycles, furniture, outdoor equipment, machinery, electrical cabinets, pipeline systems, and general industrial and consumer goods.
Powder coating is a dry finishing technology where finely ground powder is electrostatically sprayed onto a metal or non-metal surface and then cured at high temperature. After curing, the powder melts into a continuous, durable, and decorative coating layer.
Powder coating protects the substrate from corrosion, weathering, chemical attack, and mechanical wear. It also provides decorative appearance with rich colors, gloss levels, textures, and special effects.
In many industrial applications, powder coating outperforms liquid paint. It forms a thicker and tougher coating, resists corrosion and chemicals better, and does not contain VOCs. It also provides excellent consistency and cost-effective mass production.
It is called powder coating because the coating material is a solid powder instead of a liquid paint. The coating is formed by melting and curing powder particles under heat.
Powder coatings include several families depending on resin chemistry:
• Epoxy powders
• Polyester powders
• Epoxy-polyester hybrid powders
• Polyurethane powders
• Acrylic powders
• Fluorocarbon (PVDF) powders
Each type has its own performance features such as corrosion resistance, UV resistance, chemical resistance, outdoor durability, or decorative properties.
Powder coatings are based on thermoset or thermoplastic resins combined with pigments, curing agents, fillers, additives, and in some cases metallic or effect particles. Common substrates include steel, aluminum, galvanized metal, MDF, and certain heat-resistant plastics.
The lifespan depends on powder type, film thickness, application method, pretreatment, and service environment. Indoor coatings can last more than 10–20 years. High-grade outdoor polyester or fluorocarbon powders can last 15–25 years or longer under UV exposure.
For help with solutions customized to your business needs, contact Export Director now.
Export Director
With 20+ years of experience and We firmly believe that product quality is the basis of cooperation.
Send Inquiry
TEl
+86-21-6420 0566
