Our company’s aluminum wheel hub powder coating is a series of products specially designed for the characteristics of wheel hub bottom layer protection and surface glazing coating. It is a series of products with multiple varieties that are suitable for different requirements and coating characteristics. The product has excellent leveling, strong adhesion and good salt spray resistance.
Deursigtige poeier
High transparency pure polyester transparent powder
Ordinary transparency pure polyester transparent powder
Base powder
High leveling pure polyester base powder
High leveling epoxy polyester mixed base powder
Our company’s aluminum wheel hub powder coating is a series of products specially designed for the characteristics of wheel hub bottom layer protection and surface glazing coating. It is a series of products specially designed for different requirements and coating characteristics.
Kartonverpakking, uitgevoer met twee lae polivinielchloried-plastieksakke, netto gewig van elke boks is 20 kg. Nie-gevaarlike items kan op verskeie maniere vervoer word, maar moet vermy word van direkte sonlig, vog en hitte, en kontak met chemikalieë.
Operateurs moet stofmaskers dra tydens gebruik om inaseming van stof te vermy en langtermynkontak tussen vel en poeierbedekking te verminder. Verf wat aan die vel vassit, kan met seep gewas word.
| eienskappe | The product has excellent leveling, strong adhesion and good salt spray resistance. |
| soortlike gewig | 1.2~1.8g/cm’ (depending on the formula and color) |
| deeltjiegrootte | Afhangende van die doel, het die standaardtipe 'n gemiddelde deeltjiegrootte van 35~40 mikron, minder as 10 mikron poeier <10%, en groter as 100 mikron poeier <0.5%. |
| Bergingsstabiliteit | Powder coatings for aluminum wheels should be stored in a dry and ventilated room below 35°C, and avoid direct sunlight. If stored in an air-conditioned room, the powder must be stored at room temperature or the same (temperature) as the spraying equipment before use to avoid moisture. Under this condition, the powder can be stably stored for 12 months. If it is exceeded, it must be re-tested. If the result meets the requirements, it can still be used. |
Deursigtige poeier
| Toets items | Inspeksiestandaard of -metode | Inspeksie-indeks |
| voorkoms | Visuele inspeksie | Verskeie bordoppervlak-effekte |
| impak | GB / T 1732 | ≥50 kg·cm |
| Buig | GB / T 6742 | ≤2mm |
| Geuttrek | GB / T 9753 | ≥6mm |
| Hardheid | GB / T 6739 | ≥H |
| adhesie | GB / T 9286 | Vlak 0 |
| Neutrale soutbespuitingsweerstand | GB / T 1771 | 800 uur; Geskrewe area: unidireksionele roes ≤2.0 mm; Ongeskrewe area: geen abnormaliteit nie |
Base powder
| Toets items | Inspeksiestandaard of -metode | Inspeksie-indeks |
| impak | GB / T 1732 | ≥50 kg·cm |
| Buig | GB / T 6742 | ≤2mm |
| Geuttrek | GB / T 9753 | ≥6mm |
| Hardheid | GB / T 6739 | ≥H |
| adhesie | GB / T 9286 | Vlak 0 |
| Neutrale soutbespuitingsweerstand | GB / T 1771 | 800 uur; Geskrewe area: unidireksionele roes ≤2.0 mm; Ongeskrewe area: geen abnormaliteit nie |
| Genesingstoestande | Recommendation: acrylic transparent powder 180℃/10mins, pure polyester transparent powder 200℃/10mins or low temperature curing 180℃10mins, base powder 180℃/10mims. | |
For help with solutions customized to your business needs, contact Export Director now.
Export Director
With 20+ years of experience and We firmly believe that product quality is the basis of cooperation.
Send Inquiry
TEl
+86-21-6420 0566
