This series of products uses saturated polyester resin and TGIC curing agent as the main base material to make thermosetting powder coating.
Verskeie plooie, metaal, pêrelagtige effekte en gemengde kleure, ens.
Suitable for various long-term outdoor exposure product coating:
1. Huishoudelike toestelle: outdoor units of air conditioners, indoor appliances and lamps with high lighting conditions;
2. Construction industry applications: colorful curtain walls, door and window frames, ceilings with high lighting conditions;
3. Traffic facilities: highway guardrails and grilles; 3. Auto parts, sports facilities, fitness equipment, gas station equipment, and courtyard facilities.
Carton packaging, lined with two layers of PVC plastic bags, net weight of each box is 20kg. Non-dangerous goods can be transported in various ways, but should be kept away from direct sunlight, moisture and heat, and contact with chemicals.
Operateurs moet stofmaskers dra tydens gebruik om inaseming van stof te vermy en langtermynkontak tussen vel en poeierbedekking te verminder. Verf wat aan die vel vassit, kan met seep gewas word.
| soortlike gewig | 1.4~1.8g/cm” (depending on the formula and color) |
| deeltjiegrootte | Depending on the purpose, the standard type has an average particle size of 35~40 microns, less than 10 microns powder <10%, greater than 100 microns powder <0.5%. |
| Vlugtige materie | |
| Versagtingspunt | 60~95℃ varies depending on the color gloss |
| Bergingsstabiliteit | Polyester/TGIC powder coatings should be stored in a dry, ventilated room below 35℃, and avoid direct sunlight. If stored in an air-conditioned room, the powder must be stored at room temperature or the same (temperature) as the spraying equipment before use to avoid moisture. Under this condition, the powder can be stably stored for 12 months. If it exceeds the period, it must be re-tested. If the result meets the requirements, it can still be used. Note: For low-temperature curing types and powders with a gloss of less than 40% (60″), the storage temperature should be below 30℃. |
| Toets items | Inspeksiestandaard of -metode | Inspeksie-indeks |
| voorkoms | Visuele inspeksie | Verskeie bordoppervlak-effekte |
| impak | GB / T 1732 | ≥50 kg·cm |
| Buig | GB / T 6742 | ≤2mm |
| Geuttrek | GB / T 9753 | ≥8mm |
| Hardheid | GB / T 6739 | ≥H~2H |
| adhesie | GB / T 9286 | Vlak 0 |
| Neutrale soutbespuitingsweerstand | GB / T 1771 | 500 uur; Geskrewe area: unidireksionele roes ≤2.0 mm; Ongeskrewe area: geen abnormaliteit nie |
| Vog- en hittebestandheid | GB / T 1740 | 500 uur Geen abnormaliteit nie |
| Kunsmatige weerverouderingsweerstand | GB / T 1865 | 800 uur; Verkleuring ≤2 vlak; Glansverlies ≤2 vlak |
| Die bogenoemde deklaagprestasie-aanwysers kan effens afneem namate die glans afneem. | ||
| bespuiting | Hierdie reeks produkte is geskik vir die volgende spuitmetodes: korona-elektrostatiese bespuiting; wrywingselektrostatiese bespuiting; elektrostatiese vloeibedbespuiting; vloeibed-warmdompelbedekking. | |
| Laagdikte: Gebruik tussen 40~150 mikron, aanbevole filmdikte is 50~80 mikron. Gemiddelde bedekking: 10~12 vierkante meter/kg, filmdikte 60 mikron (bereken gebaseer op 100% gebruikstempo) | ||
| Genesingstoestande | 200℃/10 minutes is recommended, and it can also be designed according to user needs: 160C/20 minutes, 180℃/10 minutes, etc. | |
For help with solutions customized to your business needs, contact Export Director now.
Export Director
With 20+ years of experience and We firmly believe that product quality is the basis of cooperation.
Send Inquiry
TEl
+86-21-6420 0566
