Acrylic transparent powder coating

Surface Finish Options Overview

opis proizvoda

This series of products is made of acrylic resin and hardener to produce transparent powder coating with high transparency and excellent leveling properties.

Karakteristike proizvoda

Excellent gloss and vividness, the coating is crystal clear;Excellent fluidity, the coating surface is smooth as a mirror;Excellent weather resistance in harsh outdoor environments, maintaining the original color of the coating;Good surface hardness and strong scratch resistance.

Područja primjene

1. Designed for automotive aluminum wheel surface finishing, and suitable as a high-performance finishing coating for various appliances, such as furniture metal tripods, bicycles, and door handles;

2. Suitable as a finishing protective layer for metal powder coatings.

Transportna ambalaža

Kartonska ambalaža, obložena s dva sloja plastičnih vrećica od polivinilhlorida, neto težina svake kutije je 20 kg. Neopasne stvari mogu se transportovati na različite načine, ali ih treba držati dalje od direktne sunčeve svjetlosti, vlage i toplote, te kontakta s hemikalijama.

Higijena i sigurnost

Operateri trebaju nositi maske za prašinu tokom upotrebe kako bi izbjegli udisanje prašine i smanjili dugotrajni kontakt između kože i praškastog premaza. Boja koja se zalijepila za kožu može se oprati sapunom.

Svojstva praha

Specificna gravitacija	1.0~1.5 g/cm
veličine čestica	Depending on the application
Stabilnost skladištenja	Acrylic transparent powder coating should be stored in a dry, ventilated room below 25℃, and avoid direct sunlight. If stored in an air-conditioned room, the powder must be stored at room temperature or the same temperature as the spraying equipment before use to avoid moisture. Under this condition, the powder can be stored stably for 12 months. If it is exceeded, it must be re-tested. If the result meets the requirements, it can still be used.

Svojstva premaza

Ispitne stavke	Standard ili metoda inspekcije	Indeks inspekcije
izgled	Vizuelni pregled	Razni efekti površine ploče
udar	GB / T 1732	≥50 kg·cm
savijanje	GB / T 6742	≤2mm
Cupping	GB / T 9753	≥8mm
tvrdoća	GB / T 6739	≥H~2H
prianjanje	GB / T 9286	nivo 0
Otpornost na neutralnu slanu maglu	GB / T 1771	500h; Ogrebano područje: jednosmjerna hrđa ≤2.0 mm; Neogrebano područje: bez abnormalnosti
Otpornost na vlagu i toplinu	GB / T 1740	500h Nema abnormalnosti
Otpornost na umjetno starenje zbog vremenskih uvjeta	GB / T 1865	800h; Promjena boje ≤2 nivoa; Gubitak sjaja ≤2 nivoa
Gore navedeni pokazatelji performansi premaza mogu se neznatno smanjiti sa smanjenjem sjaja.