This series of products uses polyester resin and epoxy resin as the main base material to make thermosetting powder coating.
Razne bore, metal, sedefasti efekti i miješane boje itd.
Suitable for coating of various indoor products, widely used in any indoor purposes such as furniture, household appliances, industrial equipment, sports equipment, toys, hardware machinery, store shelves, lamps, etc.
Kartonska ambalaža, obložena s dva sloja plastičnih vrećica od polivinilhlorida, neto težina svake kutije je 20 kg. Neopasne stvari mogu se transportovati na različite načine, ali ih treba držati dalje od direktne sunčeve svjetlosti, vlage i toplote, te kontakta s hemikalijama.
Operateri trebaju nositi maske za prašinu tokom upotrebe kako bi izbjegli udisanje prašine i smanjili dugotrajni kontakt između kože i praškastog premaza. Boja koja se zalijepila za kožu može se oprati sapunom.
| Specificna gravitacija | 1.4~1.8g/cm3 (depending on the formulation and color) |
| veličine čestica | Depending on the purpose, the standard type has an average particle size of 35~40 microns, less than 10 microns powder <10%, greater than 100 microns powder <0.5%. |
| Isparljive materije | |
| Točka omekšavanja | 60~95℃ varies depending on the color gloss |
| Stabilnost skladištenja | Epoxy/polyester powder coatings should be stored in a dry, ventilated room below 35℃, and avoid direct sunlight. If stored in an air-conditioned room, the powder must be stored at room temperature or the same (temperature) as the spraying equipment before use to avoid moisture. Under this condition, the powder can be stored stably for 12 months. If it exceeds the period, it must be re-tested. If the result meets the requirements, it can still be used. Note: For low-temperature curing types and powders with a gloss of less than 40% (60°), the storage temperature should be below 30℃. |
| Ispitne stavke | Standard ili metoda inspekcije | Indeks inspekcije |
| izgled | Vizuelni pregled | Razni efekti površine ploče |
| udar | GB / T 1732 | ≥50 kg·cm |
| savijanje | GB / T 6742 | ≤2mm |
| Cupping | GB / T 9753 | ≥8mm |
| tvrdoća | GB / T 6739 | ≥H~2H |
| prianjanje | GB / T 9286 | nivo 0 |
| Otporno na slanu prskalicu | GB / T 1771 | 500h; Ogrebano područje: jednosmjerna hrđa ≤2.0 mm; Neogrebano područje: bez abnormalnosti |
| Otpornost na vlagu i toplinu | GB / T 1740 | 500h Nema abnormalnosti |
| Fotostarenje | Poor light resistance, not recommended for outdoor use | |
| Gore navedeni pokazatelji performansi premaza mogu se neznatno smanjiti sa smanjenjem sjaja. | ||
| Prskanje | Ova serija proizvoda je pogodna za sljedeće metode prskanja: elektrostatičko prskanje koronom; elektrostatičko prskanje trenjem; elektrostatičko prskanje fluidiziranim slojem; vruće uranjanje u fluidiziranom sloju. | |
| Debljina premaza: Koristiti između 40~150 mikrona, preporučena debljina filma je 50~80 mikrona. Prosječna pokrivenost: 10~12 kvadratnih metara/kg, debljina filma 60 mikrona (izračunato na osnovu 100% stope korištenja) | ||
| Uslovi očvršćavanja | 200℃/10 minutes is recommended, and it can also be designed according to user needs: 140℃/30 minutes, 160℃/20分钟，180℃/10 minutes, etc. | |
For help with solutions customized to your business needs, contact Export Director now.
Export Director
With 20+ years of experience and We firmly believe that product quality is the basis of cooperation.
Send Inquiry
TEl
+86-21-6420 0566
