Recobriments en pols de fluoropolímer (FEVE o PVF3) MT-D3020

Surface Finish Options Overview

Descripció del producte

MT-D3020 is a series of hyperdurable powder coatings designed to meet the most demanding architectural specification requirements in the world. MT-D3020 is also designed to provide excellent cosmetic and functional protection whilst exploiting the recognized benefits of powder coatings complying with Qualicoat Class 3 and AAMA2605 and EN12206 specifications.

Propietats de la pols

Pre-tractament

Aluminium components should receive a full multi-stage chromate conversion coating or suitable chrome-free pre-treatment or suitable pre-anodising to clean and condition the substrate. Detailed advice should be sought from the pre-treatment supplier. For maximum protection it is essential to pre-treat components prior to the application of them in accordance with the MT-D Approved Applicator Manual.

Sol·licitud

Powders can be applied by manual or automatic electrostatic spray equipment. All powders can show small color differences from batch to batch, this is normal and unavoidable. Bonded products have better application properties than blended products (more stable) but attention should still be paid to line settings in order to avoid “marble effect” and changes in aspect after recycling. Products with different codes should not be mixed even if same colour and gloss. Applicators and fabricators are advised to use a single batch for parts that will be assembled together. Differences are more likely with special effect powders. For more information, it is suggested to read the Metallic Applications Guidelines.

Condicions de prova

Els resultats es basen en proves mecàniques i químiques que (tret que s'indiqui el contrari) s'han dut a terme en condicions de laboratori i es donen només a títol orientatiu. Les proves s'han determinat en condicions de laboratori utilitzant les següents propietats d'aplicació i són només orientatives.

Assajos mecànics