Powder coating is a new type of 100% solid powder coating which does not contain solvents. With no solvent, no pollution, energy and resources saving, recycling, environmental protection, higher performance, low health risk to workforce, economical advantages etc.
La majoria dels recobriments en pols s'utilitzen mitjançant polvorització electrostàtica sobre la superfície metàl·lica i, després, s'endureixen al forn per formar una capa sòlida.
Epoxy/Epoxy polyester/Polyurethane
Aluminium Profile Industry ; Windows and doors
Outdoor or indoor Furniture ; Architecture Construction
Electrodomèstics
| Prova d'article | Mètode de prova | Resultat de la prova |
| Gruix de la pel·lícula | ISO2360 | 60-80um |
| Duresa del llapis | ASTMD 3363 | H-2H |
| Doblegat | ISO1519 | ≤10mm |
| Prova de quadrícula d'1 mm | ISO2409 | 0 CLASSE |
| Test d'impuls | ASTMD2794 | Aprovat |
| Prova de ventosa | ISO1520 | ≥8mm |
| Resistència a la calor 1000 hores | ISO6270-1 | Esclatant <1 mm |
| Esprai de sal 1000 hores | ISO9227 | Propagació de la corrosió <1 mm |
1.Under dry conditions,good ventilation at a temperature not exceeding 30 C,humidity<60%
2.Storage period recommended should not exceed 12 months,in case exceeding 12 months without affecting their free flowing properties, the powder will still have optimal characteristics.
3.Should be protected from excessive heat,humidity,water and contamination with foreign materials such as powder, dust, dirt, etc.
4.Any leftover powder should be kept in an appropriate area that is cool and dry. Do not expose to the air too long as the powder properties may deteriorate with the moisture.
For help with solutions customized to your business needs, contact Export Director now.
Export Director
With 20+ years of experience and We firmly believe that product quality is the basis of cooperation.
Send Inquiry
TEl
+86-21-6420 0566
