Taas nga durability powder coatings MT-800 AM

Surface Finish Options Overview

Deskripsyon ng Produkto*

MT-800 AM is a series of high durability powder coatings designed for exterior exposure. Tested against the most severe specifications MT-800 gives significantly improved gloss retention and resistance to colour change. MT-800 AM powders are available in a wide range of colours and gloss levels and can be custom matched to the user’s requirements.MT-800 AM is a high-quality powder coating designed to meet decorative and functional demands of your specifications. Test results have proven reduction of bacteria and mold up to 99.9%.

Mga Kinaiya sa Powder

Mga Pagsulay sa Mekanikal

Pre-treatment

For maximum protection it is essential to pretreat components for exterior use prior to the application of MT-800. Aluminium components should receive a full multi-stage chromate conversion coating to clean and condition the substrate. Detailed advice should be sought from the pretreatment supplier. Galvanised steel also requires multi-stage pretreatment using either zinc phosphate or chromate conversion. Degassing of galvanised steel prior to powder application is considered mandatory – follow the procedural advice of the pretreatment supplier. MT-800 products may also be used on other substrates (eg. mild steel fabrications) for internal applications; nevertheless zinc phosphate pretreatment is regarded as essential.

Paggamit

Ang mga pulbos sa MT-800 AM mahimong magamit pinaagi sa manwal o awtomatiko nga kagamitan sa pag-spray sa electrostatic. Ang wala magamit nga powder mahimong mabawi gamit ang angay nga kagamitan ug i-recycle pinaagi sa coating system.