MT- A2201 clearcoats can be used for pillars and appliqués, roof racks, grille guards, bumpers, and mirror housings, all require protection from the environment as well as being visually harmonious with the overall design of a vehicle. MT- A2201 clearcoats are super durable (> two years Florida) and answer to the requested performance level specified by the OEMs. The line of MT- A2201 super durable polyester clearcoats (TGIC free) stand ready with excellent appearance and performance.
| Uri sa Kemikal | Polyester super-durable |
| Lugar sa paggamit | Mga bahin sa pag-trim sa awto, mga sistema sa riles sa atop |
| Gidak-on sa Particle Distributon | Pasadya nga gihimo |
| panagway | Hamis, satin |
| kolor sa | Tin-aw |
| Gloss (60°) | 60-65 GU |
| Densidad (g / cm3) | 1.20 ± 0.05 |
| Iskedyul sa pag-stoving | 20 minutos sa 190°C (oras sa temperatura sa butang) |
| Paggamit | Electrostatic |
| Kalig-on sa pagtipig | ubos sa uga, bugnaw (<25°C) nga mga kondisyon, labing menos 24 ka bulan gikan sa petsa sa produksyon |
Ang mga resulta gibase sa mekanikal ug kemikal nga mga pagsulay nga (gawas kung gipahibalo) nga gihimo sa ilawom sa mga kondisyon sa laboratoryo ug gihatag alang sa paggiya lamang. Ang aktuwal nga pasundayag sa produkto magdepende sa mga kahimtang diin gigamit ang produkto.
| Substrate | Steel panel, Aluminum |
| Pansamantala | Bonder (WH/60/OC) iron phosphate, Bonder (722/W/OF) |
| Gibag-on sa pelikula | 70 µm |
| Eskedyul sa pagtambal | 10 minutos 190°C |
| pagpilit | DIN EN ISO 2409 | Gt 0A |
| Erichsen Cupping | DIN EN ISO 1520 | ≥ 3 mm |
| Epekto | ASTM D 2794 | ≥ 10 ip (direct) |
Steel surfaces to be coated must be clean and free from grease. For maximum protection it is essential to pre-treat components prior to the application the basecoat and of MT- A2201 clearcoat. Iron Phosphate and Zinc Phosphate of ferrous metals improve corrosion resistance. Aluminium parts require a chromate conversion pre-treatmentt.
MT-A2201 powders can be applied by manual or automatic electrostatic spray equipment. It is recommended that for consistent application and appearance product be fluidized during application. Unused powder can be reclaimed using suitable equipment and recycled through the coating system.
For help with solutions customized to your business needs, contact Export Director now.
Export Director
With 20+ years of experience and We firmly believe that product quality is the basis of cooperation.
Send Inquiry
TEl
+86-21-6420 0566
