MT-D3020 is a series of hyperdurable powder coatings designed to meet the most demanding architectural specification requirements in the world. MT-D3020 is also designed to provide excellent cosmetic and functional protection whilst exploiting the recognized benefits of powder coatings complying with Qualicoat Class 3 and AAMA2605 and EN12206 specifications.
| Kasagaran nga kantidad | |
| Uri sa Kemikal | Fluoropolymer |
| panagway | Hamis nga Matt |
| Densidad | 1.2 – 1.7 g/cm³, depending on colour |
| Gloss (60°) | 15 – 30 GU |
| Pag-apod-apod sa gidak-on sa partikulo | Suitable for electrostatic spray. |
| Shelf sa kinabuhi | 18 ka bulan ubos sa 25 °C |
| Mga Kahimtang sa Pagtipig | Ubos sa uga, bugnaw (≤ 25°C) nga mga kondisyon (ang mga bukas nga kahon kinahanglang ma-resealed) |
| Iskedyul sa pagtambal | 20 – 35 min at 190°C 15 – 25 min at 200°C 10- 15 min at 210°C (object temperature) |
Aluminium components should receive a full multi-stage chromate conversion coating or suitable chrome-free pre-treatment or suitable pre-anodising to clean and condition the substrate. Detailed advice should be sought from the pre-treatment supplier. For maximum protection it is essential to pre-treat components prior to the application of them in accordance with the MT-D Approved Applicator Manual.
Powders can be applied by manual or automatic electrostatic spray equipment. All powders can show small color differences from batch to batch, this is normal and unavoidable. Bonded products have better application properties than blended products (more stable) but attention should still be paid to line settings in order to avoid “marble effect” and changes in aspect after recycling. Products with different codes should not be mixed even if same colour and gloss. Applicators and fabricators are advised to use a single batch for parts that will be assembled together. Differences are more likely with special effect powders. For more information, it is suggested to read the Metallic Applications Guidelines.
The results are based on mechanical and chemical tests which (unless otherwise indicated) have been carried out under laboratory conditions and are given for guidance only Testing has been determined under laboratory conditions using the following application properties and is for guidance only.
| Pre-treatment | Chrome free Qualicoat/GSB approved pretreatment |
| Substrate | Aluminum (0.5-0.8 mm Al Mg1) |
| Iskedyul sa pagtambal | 20 min sa 200°C (temperatura sa butang) |
| Gibag-on sa pelikula | 50 – 80µm, ISO 2360 |
| Kasagaran nga kantidad | Pamaagi/standard | |
| pagpilit | Class 0 | ISO 2409 (2 mm Crosshatch |
| Erichsen cupping | Pass Qualicoat class 3 requirements | ISO 1520 |
| pagka-flexible | Pass Qualicoat class 3 requirements | ISO 1519 |
| Impact-ato | Pass Qualicoat class 3 requirements | ISO 6272-2 (d/r) |
For help with solutions customized to your business needs, contact Export Director now.
Export Director
With 20+ years of experience and We firmly believe that product quality is the basis of cooperation.
Send Inquiry
TEl
+86-21-6420 0566
