This series of products is based on saturated hydroxyl polyester resin and TGIC curing agent as the main base materials, and is a thermosetting powder coating with excellent weather resistance designed for outdoor materials used in construction.
High weather resistance, strong mechanical properties;
Excellent water boiling resistance, excellent corrosion resistance;
Good polishing, good construction adaptability and high powder coating rate;
Excellent resistance to excessive baking.
Various textures, thermal transfer, metal, pearlescent effects and mixed colors, etc.
Specially used for spraying of architectural aluminum alloy profiles.
Carton packaging, lined with two layers of polyvinyl chloride plastic bags, net weight of each box is 20kg. Non-hazardous items can be transported in various ways, but should be kept away from direct sunlight, moisture and heat, and contact with chemicals.
Ang mga operator kinahanglan magsul-ob og mga maskara sa abog sa panahon sa paggamit aron malikayan ang pag-inhaling sa abog ug maminusan ang dugay nga pagkontak tali sa panit ug powder coating. Ang pintura nga gitaod sa panit mahimong hugasan gamit ang sabon.
| Piho nga grabidad | 1.2~1.8g/cm³ (depending on the formula and color) |
| gidak-on tipik | Depending on the purpose, the standard type has an average particle size of 20~45 microns, less than 10 microns powder <8%, greater than 70 microns powder <20% |
| Mabulukon nga butang | |
| Punto sa paglumo | 60~95℃ varies depending on the color and gloss |
| Kalig-on sa pagtipig | Polyester/TGIC powder coatings should be stored in a dry and ventilated room below 35℃, and avoid direct sunlight. If stored in an air-conditioned room, the powder must be stored at room temperature or the same (temperature) as the spraying equipment before use to avoid moisture. Under this condition, the powder can be stored stably for 12 months. If it exceeds the period, it must be re-tested. If the result meets the requirements, it can still be used. Note: For low-temperature curing types and powders with a gloss of less than 40% (60°), the storage temperature should be below 30℃. |
| Pagpangita mga butang | Inspeksyon nga sumbanan o pamaagi | Index sa inspeksyon |
| panagway | Visual inspeksyon | Nagkalainlain nga epekto sa ibabaw sa board |
| Epekto | GB / T 1732 | ≥50Kg*cm |
| Pagtan-aw | GB / T 6742 | ≤2mm |
| pagpilit | GB / T 9753 | ≥6mm |
| katig-a | GB / T 9286 | nga ang-ang 0 |
| Umog ug kainit nga pagsukol | GB / T 6739 | ≥H |
| Nagabukal nga resistensya sa tubig | GB / T 1740 | 500h Walay abnormalidad |
| Acetic acid spray resistance | GB / T 6682 | 2h No shedding or wrinkling, extremely dispersed and tiny bubbles are allowed, and slight color changes are allowed |
| Artipisyal nga weathering resistance | GB / T 1771 | 1000h No blistering or shedding of the coating, and the unilateral corrosion of the line does not exceed 4mm |
| Solvent resistance (hydrochloric acid) | GB / T 1865 | 1000h Color difference △E≤5; light retention rate ≥50% |
| Pag-spray | Kini nga serye sa mga produkto angay alang sa mosunod nga mga pamaagi sa pag-spray: corona electrostatic spraying; friction electrostatic spraying; electrostatic fluidized bed spraying; fluidized bed hot dip coating. | |
| Gibag-on sa coating: Paggamit tali sa 40 ~ 150 microns, girekomenda nga gibag-on sa pelikula mao ang 50 ~ 80 microns. | ||
| Mga kondisyon sa pag-ayo | Girekomenda ang 200 ℃ / 15 minuto, ug mahimo usab kini nga gidisenyo sumala sa mga panginahanglanon sa tiggamit. | |
For help with solutions customized to your business needs, contact Export Director now.
Export Director
With 20+ years of experience and We firmly believe that product quality is the basis of cooperation.
Send Inquiry
TEl
+86-21-6420 0566
