MT-A1242 powder coating has an excellent line of coatings for coil springs, and torsion bars essential to the safe performance and comfortable ride of today’s car and truck chassis systems. MT-A1242’s single layer systems offer unyielding performance in corrosion and chip resistance balanced with excellent application efficiencies. Our patented Super Single Coat for coil springs offers superior corrosion protection and critical chip resistance to bring you the most economical and responsible choices in coatings for high performance, high tensile springs.
| Tipu chimicu | Epossi |
| Zona d'usu | Automotive suspension springs |
| Aspettu | Smooth |
| Livellu di lucidità (60°) | >40 GU |
| Color | Neru |
| Spessore di u film cunsigliatu | 330 – 380 µm (13 – 15 mils) |
| Densità (g / cm3) | 1.41 ± 0.05 (calculated) 0.9 – 1.2 (measured, cured film) |
| Gel time (at 200 °C) | 36 - 54 seg |
| Candidatura | Elettrostatici |
| Storage | Under dry, cool (<21°C) conditions |
| A Vita Stantò | 10 mesi da a data di produzzione |
| Pianu di curazione (à a temperatura di l'ughjettu) | 25 minuti à 150°C (tempu à a temperatura di l'ughjettu) 25 minutes at 300°F (time at object temperature) |
| adhesion francese | DIN EN ISO 2409 | gt 0 |
| Durezza di Penna | TSH1539G | B |
| Coppettazione Erichsen | DIN EN ISO 1520 | ≥ 8 mm |
| A resistenza Impact | DIN EN ISO 6272 | ≥ 140 ip (direttu) ≥ 140 ip (reverse) |
Testing has been determined under laboratory conditions using the following application properties and is for guidance only.
| Sustituir | Steel panels CRS ACT B958 P90 |
| Pretrattu | Fosfatu di zincu |
| Film spessità | 330 – 380 µ (13 – 15 mils) |
| Calendariu di cura | 20 minuti à 160 °C |
Actual film performance will depend on the individiual circumstances in which the product is used.
Steel surfaces to be coated must be clean and free from grease. For maximum protection it is essential to pre-treat components prior to the application of MT-A1242. Iron Phosphate and Zinc Phosphate of ferrous metals improve corrosion resistance.
E polveri MT-A1242 ponu esse applicate da apparecchiature di spruzzatura elettrostatica manuale o automatica. Hè cunsigliatu di fluidificà u pruduttu durante l'applicazione per una applicazione è un aspettu uniforme. A polvere micca aduprata pò esse recuperata cù apparecchiature adatte è riciclata attraversu u sistema di rivestimentu.
For help with solutions customized to your business needs, contact Export Director now.
Export Director
With 20+ years of experience and We firmly believe that product quality is the basis of cooperation.
Send Inquiry
TEl
+86-21-6420 0566
