Polyester and acrylic based powder coating MT-CA220G White

Surface Finish Options Overview

popis produktu

MT-CA220G is a polyester and acrylic based powder coating designed for exterior exposure offering low gloss and weather resistance from a single coat finish. MT-CA220G is part of the MT range of powder coatings with high total reflectance, designed specifically for the lighting market.

Vlastnosti prášku

Zkušební podmínky

The results shown below are based on mechanical and chemical tests which (unless otherwise indicated) have been carried out under laboratory conditions and are given for guidance only. Actual product performance will depend upon the circumstances under which the product is used.

Mechanické testy

Předúprava

Steel surfaces to be coated must be clean and free from grease, mill scale and rust. For maximum protection, it is essential to pre-treat components prior to the application of MT-CA220G. Iron phosphate and zinc phosphate pre-treatment of ferrous substrates improve corrosion resistance. Aluminium substrates may require a chromate conversion coating.

editaci videa

MT-CA220G can be applied using manual or automatic electrostatic spray equipment. It is recommended, that for consistent application and appearance, the product be fluidized during application. Unused powder can be reclaimed using suitable equipment and recycled through the coating system.