Our company’s aluminum wheel hub powder coating is a series of products specially designed for the characteristics of wheel hub bottom layer protection and surface glazing coating. It is a series of products with multiple varieties that are suitable for different requirements and coating characteristics. The product has excellent leveling, strong adhesion and good salt spray resistance.
Gennemsigtigt pulver
High transparency pure polyester transparent powder
Ordinary transparency pure polyester transparent powder
Base powder
High leveling pure polyester base powder
High leveling epoxy polyester mixed base powder
Our company’s aluminum wheel hub powder coating is a series of products specially designed for the characteristics of wheel hub bottom layer protection and surface glazing coating. It is a series of products specially designed for different requirements and coating characteristics.
Kartonemballage foret med to lag polyvinylchlorid-plastposer, nettovægten for hver kasse er 20 kg. Ikke-farlige genstande kan transporteres på forskellige måder, men bør undgås direkte sollys, fugt og varme samt kontakt med kemikalier.
Operatører bør bære støvmasker under brug for at undgå indånding af støv og minimere langvarig kontakt mellem hud og pulverlakering. Maling, der sidder fast på huden, kan vaskes med sæbe.
| Kendetegn | The product has excellent leveling, strong adhesion and good salt spray resistance. |
| massefylde | 1.2~1.8g/cm’ (depending on the formula and color) |
| Partikelstørrelse | Afhængigt af formålet har standardtypen en gennemsnitlig partikelstørrelse på 35~40 mikron, pulver på under 10 mikron <10% og pulver på over 100 mikron <0.5%. |
| Opbevaringsstabilitet | Powder coatings for aluminum wheels should be stored in a dry and ventilated room below 35°C, and avoid direct sunlight. If stored in an air-conditioned room, the powder must be stored at room temperature or the same (temperature) as the spraying equipment before use to avoid moisture. Under this condition, the powder can be stably stored for 12 months. If it is exceeded, it must be re-tested. If the result meets the requirements, it can still be used. |
Gennemsigtigt pulver
| Test emner | Inspektionsstandard eller -metode | Inspektionsindeks |
| Udseende | Visuel inspektion | Forskellige overfladeeffekter på brættet |
| Impact | GB / T 1732 | ≥50 kg·cm |
| Kantbukning | GB / T 6742 | ≤2mm |
| cupping | GB / T 9753 | ≥6mm |
| Hårdhed | GB / T 6739 | ≥H |
| Adhæsion | GB / T 9286 | Niveau 0 |
| Modstandsdygtighed over for neutral salttåge | GB / T 1771 | 800 timer; Ridset område: ensrettet rust ≤2.0 mm; Uskrevet område: ingen abnormaliteter |
Base powder
| Test emner | Inspektionsstandard eller -metode | Inspektionsindeks |
| Impact | GB / T 1732 | ≥50 kg·cm |
| Kantbukning | GB / T 6742 | ≤2mm |
| cupping | GB / T 9753 | ≥6mm |
| Hårdhed | GB / T 6739 | ≥H |
| Adhæsion | GB / T 9286 | Niveau 0 |
| Modstandsdygtighed over for neutral salttåge | GB / T 1771 | 800 timer; Ridset område: ensrettet rust ≤2.0 mm; Uskrevet område: ingen abnormaliteter |
| Hærdningsforhold | Recommendation: acrylic transparent powder 180℃/10mins, pure polyester transparent powder 200℃/10mins or low temperature curing 180℃10mins, base powder 180℃/10mims. | |
For help with solutions customized to your business needs, contact Export Director now.
Export Director
With 20+ years of experience and We firmly believe that product quality is the basis of cooperation.
Send Inquiry
TEl
+86-21-6420 0566
