Akryl transparent pulverlakering

Surface Finish Options Overview

Produktbeskrivelse

This series of products is made of acrylic resin and hardener to produce transparent powder coating with high transparency and excellent leveling properties.

Produktegenskaber

Excellent gloss and vividness, the coating is crystal clear;Excellent fluidity, the coating surface is smooth as a mirror;Excellent weather resistance in harsh outdoor environments, maintaining the original color of the coating;Good surface hardness and strong scratch resistance.

Anvendelsesområder

1. Designed for automotive aluminum wheel surface finishing, and suitable as a high-performance finishing coating for various appliances, such as furniture metal tripods, bicycles, and door handles;

2. Suitable as a finishing protective layer for metal powder coatings.

Transportemballage

Kartonemballage foret med to lag polyvinylchlorid-plastposer, nettovægten for hver kasse er 20 kg. Ikke-farlige genstande kan transporteres på forskellige måder, men bør holdes væk fra direkte sollys, fugt og varme samt kontakt med kemikalier.

Hygiejne og sikkerhed

Operatører bør bære støvmasker under brug for at undgå indånding af støv og minimere langvarig kontakt mellem hud og pulverlakering. Maling, der sidder fast på huden, kan vaskes med sæbe.

Pulver egenskaber

massefylde	1.0~1.5 g/cm
Partikelstørrelse	Depending on the application
Opbevaringsstabilitet	Acrylic transparent powder coating should be stored in a dry, ventilated room below 25℃, and avoid direct sunlight. If stored in an air-conditioned room, the powder must be stored at room temperature or the same temperature as the spraying equipment before use to avoid moisture. Under this condition, the powder can be stored stably for 12 months. If it is exceeded, it must be re-tested. If the result meets the requirements, it can still be used.

Belægningsegenskaber

Test emner	Inspektionsstandard eller -metode	Inspektionsindeks
Udseende	Visuel inspektion	Forskellige overfladeeffekter på brættet
Impact	GB / T 1732	≥50 kg·cm
Kantbukning	GB / T 6742	≤2mm
cupping	GB / T 9753	≥8mm
Hårdhed	GB / T 6739	≥H~2H
Adhæsion	GB / T 9286	Niveau 0
Modstandsdygtighed over for neutral salttåge	GB / T 1771	500 timer; Ridset område: ensrettet rust ≤2.0 mm; Uskrevet område: ingen abnormaliteter
Fugt- og varmebestandighed	GB / T 1740	500 timer Ingen unormalitet
Kunstig vejrbestandighed	GB / T 1865	800 timer; Misfarvning ≤2 niveau; Glanstab ≤2 niveau
Ovenstående indikatorer for belægningsydelse kan falde en smule, efterhånden som glansen falder.