Standard byggematerialer pulverlakering

Surface Finish Options Overview

Polyester resin and TGIC curing agent as the main raw materials.

Belægningsegenskaber:

Good adhesion, excellent mechanical properties, tough coating film.

Smooth and smooth film

Good Outdoor endurance

Fremragende modstandsdygtighed over for overdreven bagning

Påføring:

Suitable for various outdoor products such as: outdoor lighting, beach chair, solar water heater,

outdoor air conditioning unit, aluminum curtain wall, door and window frame, ceiling, highway guardrail, fence, sports facilities, communication equipment, etc

Applikationsparametre:

Hærdningstid

200°Cx10–15 mins

Recommended film thickness :

60-80 um

Sprøjtemetode:

højspændings elektrostatisk sprøjtning 60-80KV

STANDARD TESTMETODE FOR ITEMISERING

In the above tests, 0.8mm cold rolled steel plates with oil and rust removal were used. The film thickness was 40 ~ 80um, and the performance index of the film would change slightly with different gloss.

Dette produkt indeholder ikke arsen, selen, bly, hexavalent krom, kviksølv, antimon, cadmium og andre tungmetaller og opfylder RoHS-kravene.

Storage conditions: dry at about 35C, stored in the ventilated room, avoid direct sunlight. Under these conditions, the powder can be stored for 12 months, product can still be used after re-examined to be in good condition even if it is found to be expired.

Note: All the test indicators mentioned in this report are the data obtained from laboratory tests for reference only and do not represent the performance. commitment of the product application.

Resultaterne varierer med miljøfaktorer og andre forhold.