Powder coatings are also called 4E products because of their environmental protection, energy saving, safety, and economy.
| produkto nomon | tipo | produkto priskribo | normo | Weathering life |
|---|---|---|---|---|
| PCNH | Super Weathering | Made of special super weathering resin, inorganic ceramic pigment and special additives, used for outdoor high-end weathering products | AAMA2603-02 | >10Y |
| PCNF | modified fluorocarbon | The fluorocarbon powder, which is a combination of fluorine-modified, stable bond-modified super-weather-resistant resin and inorganic special pigments, has the characteristics of super weather resistance, high hardness, water cleaning resistance, acid, alkali and salt resistance. | AAMA2604-05 | >15Y |
| PVDF | fluorokarbono | It is developed with 70% fluorocarbon and special pigment fillers, and has the characteristics of high hardness, easy cleaning, solvent resistance, acid, alkali and salt resistance, anti-aging, high weather resistance, etc., commonly known as the “king of coatings”. | GB/T23443-2009 AAMA2605-05 | >20Y |
| FEVE | thermosetting fluorocarbon | 70% fluorine content, belongs to thermosetting fluorocarbon powder coating, and the production process and cost are relatively high. | AAMA2605-05 | >20Y |
Aluminum parts need to be chromized or passivated before spraying fluorocarbon powder coatings, so that the product can achieve the best performance after spraying.
The distance between the electrostatic gun and the workpiece is 120-180mm, the voltage is 40-80KV, and the current is 10-20uA. Due to the differences between various electrostatic spray guns, it is recommended that the atomization parameters and powder output be adjusted according to the needs of the site.
Curing temperature: 235±5℃ (actual heating temperature of the workpiece)
Curing time: 15-20min
| SafetyProject | Liquid fluorocarbon coating | Powder fluorocarbon coating |
|---|---|---|
| Coating equipment | Liquid coating line | Powder coating line |
| Solvila uzo | 70% solvent | Sensolventa |
| Coating use rate | 35-60% | 95-100% |
| Energio-konsumo | Grandega | malgranda |
| mediprotektado | A large amount of organic solvents evaporate, which is harmful to the environment | Environmental protection, VOC emissions are infinitely close to 0 |
| sekureco | Flammable and explosive, unsafe | Very high safety |
| kosto | Alta kosto | Malalta kosto |
| Tegaĵo-konsisto | 70% PVDF content | Same as liquid coating |
| Veterrezisto | Meets AAMA2605 standard | Same as liquid coating |
| malmoleco | Pli mola | Tre alta |
| Abrasion-rezisto | Bonan | Tre bona |
| Usage license | postulata | postulata |
| ebenaĵo | Tre bona | Similar to liquid coating |
| Application performance | Liquid fluorocarbon coating Powder | fluorokarbona tegaĵo |
|---|---|---|
| Substrato | Aluminum substrate, epoxy primer substrate, zinc-rich substrate | Same as liquid coating |
| Pretrakto | Pre-treat the surface to make it meet AAMA2605 | Same as liquid coating |
| Filmo dikeco | Two coatings: 30~40um; multiple coatings: above 40um | 50 ~ 80O |
| Resaniga traktado | 232~249℃PMT(10~20min) | Same as liquid coating |
| Uzofteco | ~ 50% | ~ 100% |
| mediprotektado | A large amount of harmful solvents evaporate, waste liquid and waste residue | Neniuj volatilaj solviloj |
| Solventoj | A large amount of solvents are required | Neniuj solviloj |
| Kolora diferenco | The color difference is affected by process changes | The color difference is slightly affected by process changes |
| Solida enhavo | pri 40% | 100% |
| Brilo (60°) | 15 ~ 35 ° | 15 ~ 60 ° |
| Krajona malmoleco | ≥F | ≥2H |
| Abrasion-rezisto | Friction coefficient 555±10 | Iomete pli alta |
| Solva rezisto | MEK rubs back and forth 100 times | Same as liquid coating |
| Wet/dry paint adhesion | The film does not peel off after removing the tape | Same as liquid coating |
| Salt spray resistance 1000h | The line becomes bare metal 1/32 inch | Same as liquid coating |
| Brilretenado | Accelerated aging test according to AAMA2605 standard, gloss retention 50% | Same as liquid coating |
| Color retention/powdering | According to AAMA2605 standard, color difference ≤5. powdering rate ≥8 | Same as liquid coating |
| produkto nomon | tipo | Series naming | Parteta grandeco |
|---|---|---|---|
| PCNH | Super weather-resistant | permanent series~No 1 | 34 ~ 38O |
| PCNF | Modified fluorocarbon | permanent series~No 2 | 28 ~ 36O |
| PVDF | Fluorocarbon | permanent series~No 3 | 28 ~ 36O |
| FEVE | Thermosetting fluorocarbon | permanent series~No 4 | 28 ~ 36O |
Suitable for walls or steel structures with super weather resistance requirements and landmark buildings, widely used in protective coatings such as exhibition centers, government buildings, bridges, etc. Applicable to various outdoor metal products: such as metal curtain wall aluminum profiles, open-air stadium seats, ceiling material coatings, sports equipment outdoor lamps, industrial equipment, auto parts, etc.
AAMA2603
| Seria nombro | Testobjekto | Testa metodo | Required index |
|---|---|---|---|
| 1 | Pulvora partikla grandeco | Partiklogranda analizilo | ≤10um ≤10% DV50 34~38um |
| 2 | Coating appearance/color/color difference | AAMA2603 | Observe surface defects at 3 meters and 900. The color is within the agreed range. |
| 3 | Filmo dikeco | AAMA2603 | 80% of the local film thickness ≥20um; local film thickness ≥17 um |
| 4 | Brilo (60°) | AAMA2603 | ±5 unuoj |
| 5 | Dry film adhesion | AAMA2603 | Cross-cut spacing 1mm, no boiling water adhesion |
| 6 | Krajona malmoleco | AAMA2603 | ≥1.MinimumH |
| 7 | Efika testo | AAMA2603 | 18N·M, (3±0.3)mm, same as standard test panel |
| 8 | Neutral smoke test (NSS) | AAMA2603 | NSS 1000h Minimum rating of seven，Minimum blister of eight |
| 9 | Humideco kaj varmorezisto | AAMA2603 | 380C，100%RH，1500h |
| 10 | Veterrezisto | AAMA2603 | Xenon lamp 1000h Florida ≥1 year |
For help with solutions customized to your business needs, contact Export Director now.
Export Director
With 20+ years of experience and We firmly believe that product quality is the basis of cooperation.
Send Inquiry
TEl
+86-21-6420 0566
