Pura poliestera/Primid-tipa pulvora tegaĵa serio

Surface Finish Options Overview

Introduction: Made of polyester resin and Primid curing agent as the main raw materials.

Elstaraĵoj

–Good adhesion and excellent mechanical properties

–Smooth and smooth coating

–Good chemical and corrosion resistance

–Thick coating is prone to pinholes (above 140 microns)

–Higher storage stability and shelf life than TGIC type

apliko:

Suitable for decoration and protection of various outdoor products: such as household appliances, architectural aluminum profiles, transportation facilities, stadium facilities, courtyard facilities, etc.

Produkta serio:

–Can be made into a variety of gloss and colorful colors, the specific gloss color is subject to user requirements

—Standard weather-resistant and super weather-resistant products can be provided

Aplikaĵaj parametroj:

Curing time: 200℃×10–15 minutes

Spraying method : High-voltage electrostatic spraying 60-80 KV

Recommended film thickness: 60—80 um

The above tests all use 0.8mm degreased and derusted cold-rolled steel plates, with a coating thickness of 60-80um. The performance indicators of the coating will vary slightly with the gloss.

Ĉi tiu produkto ne enhavas arsenikon, selenon, plumbon, sesvalentan kromon, hidrargon, antimonon, kadmion kaj aliajn pezajn metalojn, kaj plenumas la postulojn de RoHS.

Kondiĉoj de stokado: Store in a dry and ventilated room at around 25°C, avoid direct sunlight. Under this condition, the powder can be stored for 6-12 months. If it is overdue, it can be re-tested. If the results meet the requirements, it can still be used.