Travidebla pulvora tegaĵo

Surface Finish Options Overview

Produkta Superrigardo

This series of products is made of polyurethane or acrylic resin with curing agent, and is a transparent powder coating with high transparency and excellent flatness resistance.

Aplikejoj

Ĉefaj aplikoj:

Automobile topcoat and exterior partsAutomobile wheel coatingIndoor and outdoor metal parts protectionHigh-performance finish layer for various metal appliances

Tipaj aplikaj scenaroj:

High-end metal furnitureHigh-end hardware productsBiciklaj partojHigh-end door handlesHigh-end craft productsGloss protection layer for metal powder coatings

Teknikaj parametroj

Bazaj ecoj de pulvoro:

Specifa pezo: 1.1~1.3g/cm³

Volatile matter: <0.5%~2% (depending on product type)

Flow rate: >130 (with good fluidization and conveying performance)

Trajtoj

	kategorio	Trajtoj	Kurigaj kondiĉoj
PE/TGIC	Poliestero/TGIC	Good leveling, excellent weather resistance, good transparency	200 ℃/10 min
	Poliestero/TGIC	Good leveling, excellent weather resistance, good transparency	200 ℃/10 min
PU	poliuretana tipo	Good leveling, excellent weather resistance, good transparency	200 ℃/15 min
Acrylic/PU	Mixed acrylic	Good leveling, excellent weather resistance, excellent weather resistance, solvent resistance	200 ℃/10 min
akrila	akrila	Excellent weather resistance and solvent resistance, Impact resistance can reach ±10kg.com. 200℃/10min 170 ℃/20 min	170 ℃/20 min

Regado de tegaĵo

objekton	Referenca normo	PE/TGIC	PU type	Acrylic/PU	akrila
aspekto	GB5237.4	plata	plata	plata	plata
Egaligo	Q/TXSLD01-03	Grado C	Grado B	Grado B	Grado A
Travidebleco	Q/TXSLD01-03	Grado B	Grado B	Grado B	Grado A
efiko	GB / T1732-93	±50kg.cm	±50kg.cm	±50kg.cm	±50kg.cm
Vastiĝo	GB / T9753-88	> 6mm	> 6mm	> 6mm	> 6mm
adhesión	GB / T9286-98	Grado 0	Grado 0	Grado 0	Grado 0
Kliniĝanta	GB6742-86	Φ2mm	Φ2mm	Φ2mm	Φ2mm
Indentation hardness	GB9275	≥80	≥80	≥80	≥80
Salo-ŝpruca testo	GB / T1771-91	No change after 1000 hours	No change after 1000 hours	No change after 1000 hours	No change after 1000 hours
Wet heat test	GB / T1740-79	1000 hours level 1	1000 hours level 1	1000 hours level 1	1000 hours level 1
Aging test Light aging	Light aging: ASTMG154QUV0.78w/m2@340nm500h	Gloss retention rate ≥80%	Gloss retention rate ≥80%	Gloss retention rate ≥80%	Gloss retention rate ≥80%
Note: The above tests all use 0.7mm thick degreased aluminum plates with a film thickness of 60-80μm; the above parameters are laboratory data and are for reference only. The actual indicators are related to factors such as customer environment, equipment, substrate, pretreatment, and spraying process.

Pakaj specifoj

Standard packaging: carton lined with plastic bag

Net weight per box: 20kg

Transportation classification: non-hazardous goods

Sekurecaj instrukcioj

Raw materials do not contain highly toxic substances

Antaŭzorgoj por uzo:

Avoid inhalation of dust (it is recommended to wear a dust mask)Reduce direct skin contactSkin contamination can be washed with soapAvoid contact with chemicals during storage