Anti-Corrosion Powder Coating for Drinking Water Pipes

Surface Finish Options Overview

produkto Enkonduko:

This product is formulated using special epoxy resins, dedicated curing agents, and food-grade pigments and fillers. It features high reactivity, strong adhesion, high cross-link density, and excellent resistance to chemicals, solvents, cathodic disbondment, as well as superior flexibility and impact resistance.

produkto Trajtoj:

Bonega adhero al la substrato.

Bona ebenigo kaj alta brilo sur la tegaĵa surfaco.

Forta rezisto al trapenetro kaj korodo.

Alta surfaca malmoleco kaj densa tegaĵo.

Supera rezisto al katoda disligado je alta temperaturo.

Malalta fandotemperaturo, alta reagemo, kaj alta kuracrapideco.

Bonaj mekanikaj ecoj kaj ekstreme forta fleksebleco.

Complies with safety evaluation standards for materials in contact with drinking water.

Parametroj de Pulvora Tegaĵo

Parametroj de rendimento de kuracita pulvora tegaĵo

Observaj Normoj: CJ/T 120-2008. GB/T 17219-1998

Aplikaj Kampoj:

Municipal drinking water supply pipes.

Aplikaj Procezoj:

Electrostatic spraying, dip coating, etc.

singardecoj:

The steel pipe surface should be free of oil and moisture; the surface treatment quality should reach Sa2 1/2 level (GB/T 8923); the anchor pattern depth should be 50-90 mm; dust and abrasives on the steel pipe surface should be blown clean. Preheating temperature should be controlled between 180-230°C.

The product should be stored in a well-ventilated, dry indoor environment with a temperature below 30°C, away from heat sources, corrosive chemicals, and chemical solvents, and protected from strong light exposure. The stacking height should not exceed four layers. Avoid long-term pressure and ensure the packaging box is sealed to prevent caking and moisture, which can affect fluidization performance.

To ensure thorough curing of the epoxy coating and better anti-corrosion performance, it is recommended to preheat the steel pipe surface to above 170°C to improve the curing completion rate.

Do not mix with other anti-corrosion powders or recycled powders. Thoroughly clean the spraying equipment when changing colors to ensure drinking water safety and compliance with health standards.