Powder coating is a new type of 100% solid powder coating which does not contain solvents. With no solvent, no pollution, energy and resources saving, recycling, environmental protection, higher performance, low health risk to workforce, economical advantages etc.
La mayoría de los recubrimientos en polvo se utilizan mediante pulverización electrostática sobre superficies metálicas y luego se curan en el horno para formar finalmente una capa sólida.
Epoxy/Epoxy polyester/Polyurethane
Aluminium Profile Industry ; Windows and doors
Outdoor or indoor Furniture ; Architecture Construction
Electrodomestico
| Elemento de prueba | Método de prueba | Resultado de la prueba |
| Espesor de la película | ISO2360 | 60-80um |
| Dureza del lápiz | ASTM D 3363 | H-2H |
| Doblar | ISO1519 | ≤10mm |
| Prueba de cuadrícula de 1 mm | ISO2409 | 0 CLASE |
| Prueba de impulso | ASTMD2794 | Pass |
| Prueba de catación | ISO1520 | ≥8mm |
| Resistencia al calor 1000 horas | ISO6270-1 | Estallido <1 mm |
| Niebla salina 1000 horas | ISO9227 | Propagación de la corrosión <1 mm |
1.Under dry conditions,good ventilation at a temperature not exceeding 30 C,humidity<60%
2.Storage period recommended should not exceed 12 months,in case exceeding 12 months without affecting their free flowing properties, the powder will still have optimal characteristics.
3.Should be protected from excessive heat,humidity,water and contamination with foreign materials such as powder, dust, dirt, etc.
4.Any leftover powder should be kept in an appropriate area that is cool and dry. Do not expose to the air too long as the powder properties may deteriorate with the moisture.
For help with solutions customized to your business needs, contact Export Director now.
Export Director
With 20+ years of experience and We firmly believe that product quality is the basis of cooperation.
Send Inquiry
TEl
+86-21-6420 0566
