Recubrimiento en polvo anodizado

Surface Finish Options Overview

It is suitable for anodic oxidation effect for product appearance, as well as environmental protection requirements such as Rohs and Reach.

Coating characteristics :

Good adhesion, excellent mechanical properties, tough coating film.

Coating film is Smooth and glossy

Good outdoor endurance

Excellent resistance to excessive baking

Postulación:

Suitable for a variety of products decoration and protection, such as: aluminum curtain wall, door and window frame, ceiling, etc

Método de pulverización:

Pintura electrostática de alto voltaje 60-80 kV

Espesor de película recomendado:

60-80 um

Parámetros de aplicación

Hora de curar

200Cx10–15mins

Standard Test Method For Itemizer

In the above tests, 0.8mm cold rolled steel plates with oil and rust removal were used. The film thickness was 40 ~ 80um, and the performance index of .the film would change slightly with different gloss.

Este producto no contiene arsénico, selenio, plomo, cromo hexavalente, mercurio, antimonio, cadmio ni otros metales pesados, y cumple con los requisitos de RoHS.

Storage conditions: dry at about 35°C, stored in the ventilated room, avoid direct sunlight. Under these conditions, the powder can be stored for 12 months, product can still be used after re -examined to be in good condition even if it is found to be expired.

Nota: Todos los indicadores de prueba mencionados en este informe son datos obtenidos de pruebas de laboratorio únicamente como referencia y no representan el compromiso de rendimiento de la aplicación del producto.

Los resultados varían según los factores ambientales y otras condiciones.