MT-600 AM is a series of polyester based powder coatings, formulated with the use of TGIC, designed for the exterior environment, offering the benefits of MT- 600 in combination with specific antimicrobial activity. MT- 600 AM powders are available in a wide range of colours in gloss, satin, matt, metallic and textured effects and can be custom matched to the user’s requirements.
| Keemiline tüüp | Polyester – TGIC |
| Osakese suurus | Sobib elektrostaatiliseks pihustamiseks |
| Erikaal | 1.2-1.8 g/cm³ depending on colour |
| Värvilised | Grey |
| Säilitamine | Hoida kuivas ja jahedas kohas temperatuuril alla 25 °C (avatud karbid tuleb uuesti sulgeda) |
| Säilitusaeg | 12 kuud |
| Stoving schedule (object temperature) | 15 minutit 190 °C juures 10 minutit 200 °C juures 8 minutit 210 °C juures |
| Paindlikkus | ISO 6860 (Conical Mandrel) | Läbi 3 mm |
| kleepumine | ISO 2409 (2mm Crosshatch) | gt 0 |
| Erichsen Cupping | ISO 1520 | Läbi 7 mm |
| Kõvadus | ISO 1518 (2000g) | Pass – no penetration to substrate |
| mõju | ISO 6272 | 50 kg cm |
| Soolapihusti | ISO 7253 (250 hours) | Pass – no corrosion creep more than 2mm from scribe |
| Cyclic Humidity | ISO 6270-1 (1000 hours) | Pass – no blistering or loss of gloss |
| Distilled Water Immersion | ISO 2812 (240 hours) | Pass – no blistering or loss of gloss |
| Exterior Durability | Excellent – non chalking, slight loss of gloss after 12 months continuous exposure but no film breakdown or reduction in protective properties | |
| Keemiline vastupidavus | Generally excellent resistance to most acids, alkalis and oils at normal temperatures | |
| Colour Stability at Elevated temperatures | Excellent for continuous exposure up to 150°C. | |
Aluminium, steel or Zintec surfaces to be coated must be clean and free from grease. Iron phosphate and particularly lightweight zinc phosphating of ferrous metals improves corrosion resistance. Aluminium substrates may require a chromate conversion coating.
MT-600 AM powders can be applied by manual or automatic electrostatic spray equipment. Unused powder can be reclaimed using suitable equipment and recycled through the coating system.
For help with solutions customized to your business needs, contact Export Director now.
Export Director
With 20+ years of experience and We firmly believe that product quality is the basis of cooperation.
Send Inquiry
TEl
+86-21-6420 0566
