Our company’s aluminum wheel hub powder coating is a series of products specially designed for the characteristics of wheel hub bottom layer protection and surface glazing coating. It is a series of products with multiple varieties that are suitable for different requirements and coating characteristics. The product has excellent leveling, strong adhesion and good salt spray resistance.
Läbipaistev pulber
High transparency pure polyester transparent powder
Ordinary transparency pure polyester transparent powder
Base powder
High leveling pure polyester base powder
High leveling epoxy polyester mixed base powder
Our company’s aluminum wheel hub powder coating is a series of products specially designed for the characteristics of wheel hub bottom layer protection and surface glazing coating. It is a series of products specially designed for different requirements and coating characteristics.
Kartongpakend, mis on vooderdatud kahe polüvinüülkloriidist kilekottidega, iga kasti netokaal on 20 kg. Mitteohtlikke esemeid saab transportida mitmel viisil, kuid neid tuleks vältida otsese päikesevalguse, niiskuse ja kuumuse ning kemikaalidega kokkupuute eest.
Operaatorid peaksid kasutamise ajal kandma tolmumaski, et vältida tolmu sissehingamist ja minimeerida naha ja pulbervärvi pikaajalist kokkupuudet. Nahale kleepunud värvi võib seebiga maha pesta.
| omadused | The product has excellent leveling, strong adhesion and good salt spray resistance. |
| Erikaal | 1.2~1.8g/cm’ (depending on the formula and color) |
| Osakese suurus | Sõltuvalt otstarbest on standardtüübi keskmine osakeste suurus 35–40 mikronit, alla 10 mikroni suuruse pulbri puhul <10% ja üle 100 mikroni suuruse pulbri puhul <0.5%. |
| Ladustamise stabiilsus | Powder coatings for aluminum wheels should be stored in a dry and ventilated room below 35°C, and avoid direct sunlight. If stored in an air-conditioned room, the powder must be stored at room temperature or the same (temperature) as the spraying equipment before use to avoid moisture. Under this condition, the powder can be stably stored for 12 months. If it is exceeded, it must be re-tested. If the result meets the requirements, it can still be used. |
Läbipaistev pulber
| Testimisüksused | Kontrollistandard või -meetod | Kontrolliindeks |
| Välimus | Visuaalne kontroll | Erinevad plaadipinna efektid |
| mõju | GB / T 1732 | ≥50 kg·cm |
| Painutamine | GB / T 6742 | ≤2mm |
| Kuppel | GB / T 9753 | ≥6mm |
| Kõvadus | GB / T 6739 | ≥H |
| kleepumine | GB / T 9286 | Tase 0 |
| Neutraalse soolapihustuse vastupidavus | GB / T 1771 | 800h; Märgistatud ala: ühesuunaline rooste ≤2.0 mm; Märgistamata ala: kõrvalekaldeid pole |
Base powder
| Testimisüksused | Kontrollistandard või -meetod | Kontrolliindeks |
| mõju | GB / T 1732 | ≥50 kg·cm |
| Painutamine | GB / T 6742 | ≤2mm |
| Kuppel | GB / T 9753 | ≥6mm |
| Kõvadus | GB / T 6739 | ≥H |
| kleepumine | GB / T 9286 | Tase 0 |
| Neutraalse soolapihustuse vastupidavus | GB / T 1771 | 800h; Märgistatud ala: ühesuunaline rooste ≤2.0 mm; Märgistamata ala: kõrvalekaldeid pole |
| Kõvenemise tingimused | Recommendation: acrylic transparent powder 180℃/10mins, pure polyester transparent powder 200℃/10mins or low temperature curing 180℃10mins, base powder 180℃/10mims. | |
For help with solutions customized to your business needs, contact Export Director now.
Export Director
With 20+ years of experience and We firmly believe that product quality is the basis of cooperation.
Send Inquiry
TEl
+86-21-6420 0566
