This series of products uses polyester resin and epoxy resin as the main base material to make thermosetting powder coating.
Erinevad kortsud, metall, pärlmutterefektid ja segavärvid jne.
Suitable for coating of various indoor products, widely used in any indoor purposes such as furniture, household appliances, industrial equipment, sports equipment, toys, hardware machinery, store shelves, lamps, etc.
Kartongpakend, mis on vooderdatud kahe polüvinüülkloriidist kilekottidega, iga kasti netokaal on 20 kg. Mitteohtlikke esemeid saab transportida mitmel viisil, kuid neid tuleks hoida eemal otsesest päikesevalgusest, niiskusest ja kuumusest ning kokkupuutest kemikaalidega.
Operaatorid peaksid kasutamise ajal kandma tolmumaski, et vältida tolmu sissehingamist ja minimeerida naha ja pulbervärvi pikaajalist kokkupuudet. Nahale kleepunud värvi võib seebiga maha pesta.
| Erikaal | 1.4~1.8g/cm3 (depending on the formulation and color) |
| Osakese suurus | Depending on the purpose, the standard type has an average particle size of 35~40 microns, less than 10 microns powder <10%, greater than 100 microns powder <0.5%. |
| Lenduvad ained | |
| Pehmenemispunkt | 60~95℃ varies depending on the color gloss |
| Ladustamise stabiilsus | Epoxy/polyester powder coatings should be stored in a dry, ventilated room below 35℃, and avoid direct sunlight. If stored in an air-conditioned room, the powder must be stored at room temperature or the same (temperature) as the spraying equipment before use to avoid moisture. Under this condition, the powder can be stored stably for 12 months. If it exceeds the period, it must be re-tested. If the result meets the requirements, it can still be used. Note: For low-temperature curing types and powders with a gloss of less than 40% (60°), the storage temperature should be below 30℃. |
| Testimisüksused | Kontrollistandard või -meetod | Kontrolliindeks |
| Välimus | Visuaalne kontroll | Erinevad plaadipinna efektid |
| mõju | GB / T 1732 | ≥50 kg·cm |
| Painutamine | GB / T 6742 | ≤2mm |
| Kuppel | GB / T 9753 | ≥8mm |
| Kõvadus | GB / T 6739 | ≥H~2H |
| kleepumine | GB / T 9286 | Tase 0 |
| Soolapihustile vastupidav | GB / T 1771 | 500h; Märgistatud ala: ühesuunaline rooste ≤2.0 mm; Märgistamata ala: kõrvalekaldeid pole |
| Niiskus- ja kuumakindlus | GB / T 1740 | 500 tundi Ebanormaalsusi pole |
| Fotovananemine | Poor light resistance, not recommended for outdoor use | |
| Ülaltoodud katte toimivusnäitajad võivad läike vähenemisel veidi väheneda. | ||
| Pihustamine | See tooteseeria sobib järgmiste pihustamismeetodite jaoks: koroonaelektrostaatiline pihustamine; hõõrdelektrostaatiline pihustamine; elektrostaatiline fluidiseeritud voodiga pihustamine; fluidiseeritud voodiga kuumkatmine. | |
| Katte paksus: Kasutage 40–150 mikronit, soovitatav kile paksus on 50–80 mikronit. Keskmine katvus: 10–12 ruutmeetrit/kg, kile paksus 60 mikronit (arvutatud 100% kasutusmäära põhjal) | ||
| Kõvenemise tingimused | 200℃/10 minutes is recommended, and it can also be designed according to user needs: 140℃/30 minutes, 160℃/20分钟，180℃/10 minutes, etc. | |
For help with solutions customized to your business needs, contact Export Director now.
Export Director
With 20+ years of experience and We firmly believe that product quality is the basis of cooperation.
Send Inquiry
TEl
+86-21-6420 0566
