Värviline metallipulber

Surface Finish Options Overview

Magic color metal powder coating

This series of products is made of special materials supplemented by high-end magic color metal materials. The coating film is highly protective, brilliant, and charming. The visual effect presented by this product is like a well-cut gem formed in the mantle layer of the earth. It is bright and starry, with wonderful three-dimensional optical dimensions and tones, and is deeply loved by the market.

Application range: aluminum alloy profiles, aluminum system doors and windows, aluminum veneers, aluminum ceilings, aluminum curtain walls, etc., as well as high-end household appliances, industrial products, car wheels, etc.

jõudlus

360° coating film 360° viewing angle has a strong metallic feel and has extremely high decorativeness

Excellent stability and strong protection

Alkali resistance, weather resistance and excellent corrosion resistance

Tulemuslikkuse näitajad

Kasutusjuhend

Kõvenemise tingimused:

200℃/10min; In order to make the coating film of the coated object cure evenly and the gloss stable, it is best to make the temperature distribution in the baking furnace uniform; and reasonably control the curing temperature and time according to the situation of the workpiece.

Eeltöötlus:

Enne pihustamist tuleb töödeldavat detaili eeltöödelda ja see peab vastama standardi GB/T 8013.3-2007 5. peatüki sätetele. Kromaadi konversioonikile mass peaks olema vahemikus 0.4–1.0 g/㎡. Keemilise konversiooni eeltöötluse ja katmise vaheline ajavahemik ei tohiks ületada 16 tundi. Põhimõtteliselt tuleks kate peale kanda kohe pärast konversioonitöötluse kuivamist.

Tooriku riputamine:

When hanging the workpiece, hang it reasonably according to the shape and thickness of the workpiece to improve the powdering rate and yield; and pay attention to keeping the spraying system and the surrounding environment clean to prevent different brands of powder coating from mixing and affecting the surface effect of the coating.

Pulbri pihustamine:

Valige mõistlikud protsessiparameetrid, kontrollige pinget, õhurõhku ja pulbri väljundit. Pulbri pihustamise keskkonnas peaks eelistatavalt olema temperatuuri ja niiskuse reguleerimise süsteem. Optimaalne pulbri pihustamise temperatuur on 15–25 ℃ ja pulbri pihustamise ruumi suhteline õhuniiskus on eelistatavalt 45–55%; lisaks tuleks kontrollida taaskasutatud pulbri osakaalu, et tagada toote värvipüsivus.

The recommended coating thickness is 60-80um, otherwise it will affect the performance of the coating.

Kile moodustumise ajal mõjutavad värvi veidi protsessitingimused, näiteks temperatuur ja paksus. Rahuldavate tulemuste saavutamiseks on soovitatav enne kasutamist testida.

Pakendamine ja ladustamine

The outer packaging of powder coating is a hard carton lined with a plastic bag, with a net weight of 25KG and 20KG per box. It should be stored at an ambient temperature below 30℃, and the storage environment should be kept ventilated and dry, and the powder should be prevented from direct sunlight. The location where the powder is stored is not allowed to be close to fire and away from heat sources.

Ohutusmeetmed

See toode on mittesüttiv ja plahvatusohtlik, põhimõtteliselt mittetoksiline ning seda ei tohi alla neelata.