Puhas polüester/Primid tüüpi pulbervärvimise seeria

Surface Finish Options Overview

Introduction: Made of polyester resin and Primid curing agent as the main raw materials.

Funktsioonid:

–Good adhesion and excellent mechanical properties

–Smooth and smooth coating

–Good chemical and corrosion resistance

–Thick coating is prone to pinholes (above 140 microns)

–Higher storage stability and shelf life than TGIC type

Kuidas kasutatda:

Suitable for decoration and protection of various outdoor products: such as household appliances, architectural aluminum profiles, transportation facilities, stadium facilities, courtyard facilities, etc.

Tooteseeria:

–Can be made into a variety of gloss and colorful colors, the specific gloss color is subject to user requirements

— Saadaval on standardsed ilmastikukindlad ja ülimalt ilmastikukindlad tooted

Rakenduse parameetrid:

Curing time: 200℃×10–15 minutes

Spraying method : High-voltage electrostatic spraying 60-80 KV

Recommended film thickness: 60—80 um

The above tests all use 0.8mm degreased and derusted cold-rolled steel plates, with a coating thickness of 60-80um. The performance indicators of the coating will vary slightly with the gloss.

See toode ei sisalda arseeni, seleeni, pliid, kuuevalentset kroomi, elavhõbedat, antimoni, kaadmiumi ega muid raskmetalle ning vastab RoHS-i nõuetele.

Säilitamistingimused: Store in a dry and ventilated room at around 25°C, avoid direct sunlight. Under this condition, the powder can be stored for 6-12 months. If it is overdue, it can be re-tested. If the results meet the requirements, it can still be used.