MT-JA010G is a polyester based powder coating, formulated using TGIC and is designed for exterior exposure offering excellent light and weather resistance from a single coat finish. MT-JA010G is part of the MT range of powder coatings with high total reflectance, designed specifically for the lighting market.
| Kemiallinen tyyppi | Polyesteri TGIC |
| Esiintyminen | Smooth Gloss |
| Hiukkaskoko | Sopii sähköstaattiseen ruiskutukseen |
| Tietty painovoima | 1.67 ± 0.05 g/cm³ |
| Filmipaksuus | 75 - 100 mikronia |
| Kattavuus | 8.0 m2/kg @75 microns |
| varastointi | Kuivassa ja viileässä, alle 25 °C:ssa (avatut laatikot on suljettava uudelleen) |
| varastointiaika | 12 kuukautta |
| Stoving schedule (esineen lämpötila) | 25–20 minuuttia 160 °C:ssa 12–15 minuuttia 175 °C:ssa 10–12 minuuttia 190 °C:ssa 8–10 minuuttia 205 °C:ssa |
The results shown below are based on mechanical and chemical tests which (unless otherwise indicated) have been carried out under laboratory conditions and are given for guidance only. Actual product performance will depend upon the circumstances under which the product is used.
| Alustan | Kylmävalssattu teräs |
| esikäsittely | B1000 Iron Phosphate |
| Filmipaksuus | 75 - 100 mikronia |
| Stoving Schedule | 10 minuuttia 190 ° C: ssa |
| testi | Tulokset | |
| kiinnittyminen | ASTM D3359 | 100% |
| Impact (direct | ASTM D2794 | 120kgcm |
| Gloss(@60°） | ISO 2813 | > 90 |
| Hardness (gouge) | ASTM D3363 | 6H |
| Hardness (scratch) | ASTM D3363 | 2H |
| Heijastusluokka | EN 16268 | A |
Steel surfaces to be coated must be clean and free from grease, mill scale and rust. For maximum protection, it is essential to pre-treat components prior to the application of MT-JA010G. Iron phosphate and zinc phosphate pre-treatment of ferrous substrates improve corrosion resistance. Aluminium substrates may require a chromate conversion coating.
MT-JA010G can be applied using manual or automatic electrostatic spray equipment. It is recommended, that for consistent application and appearance, the product be fluidized during application. Unused powder can be reclaimed using suitable equipment and recycled through the coating system.
For help with solutions customized to your business needs, contact Export Director now.
Export Director
With 20+ years of experience and We firmly believe that product quality is the basis of cooperation.
Send Inquiry
TEl
+86-21-6420 0566
