This series of products is based on saturated hydroxyl polyester resin and TGIC curing agent as the main base materials, and is a thermosetting powder coating with excellent weather resistance designed for outdoor materials used in construction.
High weather resistance, strong mechanical properties;
Excellent water boiling resistance, excellent corrosion resistance;
Good polishing, good construction adaptability and high powder coating rate;
Excellent resistance to excessive baking.
Various textures, thermal transfer, metal, pearlescent effects and mixed colors, etc.
Specially used for spraying of architectural aluminum alloy profiles.
Carton packaging, lined with two layers of polyvinyl chloride plastic bags, net weight of each box is 20kg. Non-hazardous items can be transported in various ways, but should be kept away from direct sunlight, moisture and heat, and contact with chemicals.
Käyttäjien tulee käyttää pölynaamaria käytön aikana välttääkseen pölyn hengittämistä ja minimoidakseen ihon ja jauhemaalin välisen pitkäaikaisen kosketuksen. Ihoon tarttunut maali voidaan pestä saippualla.
| Tietty painovoima | 1.2~1.8g/cm³ (depending on the formula and color) |
| Hiukkaskoko | Depending on the purpose, the standard type has an average particle size of 20~45 microns, less than 10 microns powder <8%, greater than 70 microns powder <20% |
| Epävakaa aine | |
| Pehmenemispiste | 60~95℃ varies depending on the color and gloss |
| Varastoinnin vakaus | Polyester/TGIC powder coatings should be stored in a dry and ventilated room below 35℃, and avoid direct sunlight. If stored in an air-conditioned room, the powder must be stored at room temperature or the same (temperature) as the spraying equipment before use to avoid moisture. Under this condition, the powder can be stored stably for 12 months. If it exceeds the period, it must be re-tested. If the result meets the requirements, it can still be used. Note: For low-temperature curing types and powders with a gloss of less than 40% (60°), the storage temperature should be below 30℃. |
| Testaa esineet | Tarkastusstandardi tai -menetelmä | Tarkastusindeksi |
| Esiintyminen | Silmämääräinen tarkastus | Erilaisia levypinnan tehosteita |
| Vaikutus | GB / T 1732 | ≥50Kg*cm |
| Taipuva | GB / T 6742 | ≤2mm |
| kiinnittyminen | GB / T 9753 | ≥6mm |
| Kovuus | GB / T 9286 | Tasolla 0 |
| Kosteuden ja lämmönkestävyys | GB / T 6739 | ≥H |
| Kiehuvan veden kestävyys | GB / T 1740 | 500 tuntia Ei poikkeavuuksia |
| Acetic acid spray resistance | GB / T 6682 | 2h No shedding or wrinkling, extremely dispersed and tiny bubbles are allowed, and slight color changes are allowed |
| Keinotekoisen säänkestävyys | GB / T 1771 | 1000h No blistering or shedding of the coating, and the unilateral corrosion of the line does not exceed 4mm |
| Solvent resistance (hydrochloric acid) | GB / T 1865 | 1000h Color difference △E≤5; light retention rate ≥50% |
| ruiskuttamalla | This series of products are suitable for the following spraying methods: corona electrostatic spraying; friction electrostatic spraying; electrostatic fluidized bed spraying; fluidized bed hot dip coating. | |
| Pinnoitteen paksuus: Käytä 40–150 mikronia, suositeltu kalvonpaksuus on 50–80 mikronia. | ||
| Kovettumisolosuhteet | Suositellaan 200 ℃ / 15 minuuttia, ja se voidaan suunnitella myös käyttäjän tarpeiden mukaan. | |
For help with solutions customized to your business needs, contact Export Director now.
Export Director
With 20+ years of experience and We firmly believe that product quality is the basis of cooperation.
Send Inquiry
TEl
+86-21-6420 0566
