This series of products uses saturated polyester resin and acrylic resin as the main base materials to make thermosetting powder coating.
1. Outdoor lamps;
2. Courtyard leisure facilities;
3. Building materials;
4. Aluminum ceilings and profiles;
5. Other outdoor low-gloss coatings.
Carton packaging, lined with two layers of polyvinyl chloride plastic bags, net weight of each box is 20kg. Non-hazardous items can be transported in various ways, but should be kept away from direct sunlight, moisture and heat, and contact with chemicals.
Käyttäjien tulee käyttää pölynaamaria käytön aikana välttääkseen pölyn hengittämistä ja minimoidakseen ihon ja jauhemaalin välisen pitkäaikaisen kosketuksen. Ihoon tarttunut maali voidaan pestä saippualla.
| Tietty painovoima | 1.4~1.8g/cm’ (depending on the formula and color) |
| Hiukkaskoko | Depending on the purpose, the standard type has an average particle size of 35~40 microns, less than 10 microns of powder <10%, more than 100 microns of powder <0.5%. |
| Varastoinnin vakaus | Outdoor matte powder coatings should be stored in a dry, ventilated room below 30°C, and avoid direct sunlight. If stored in an air-conditioned room, the powder must be stored at room temperature or the same (temperature) as the spraying equipment before use to avoid moisture. Under this condition, the powder can be stably stored for 6 months. If it exceeds the period, it must be re-tested. If the result meets the requirements, it can still be used. |
| Testaa esineet | Tarkastusstandardi tai -menetelmä | Tarkastusindeksi |
| Esiintyminen | Silmämääräinen tarkastus | Erilaisia levypinnan tehosteita |
| Vaikutus | GB / T 1732 | ≥50 kg·cm |
| Taipuva | GB / T 6742 | ≤2mm |
| kuppaus | GB / T 9753 | ≥8mm |
| Kovuus | GB / T 6739 | ≥H~2H |
| kiinnittyminen | GB / T 9286 | Tasolla 0 |
| Neutraalin suolasumun kestävyys | GB / T 1771 | 500 h; Naarmuuntunut alue: yksisuuntainen ruoste ≤2.0 mm; Naarmuuntumaton alue: ei poikkeavuuksia |
| Kosteuden ja lämmönkestävyys | GB / T 1740 | 500 tuntia Ei poikkeavuuksia |
| Keinotekoinen sään ikääntymisen kestävyys | GB / T 1865 | 800h; Discoloration ≤2 level; Gloss loss ≤2 level |
| Yllä olevat pinnoitteen suorituskykyindikaattorit voivat laskea hieman kiillon heikkenemisen myötä. | ||
| ruiskuttamalla | This series of products are suitable for the following spraying methods: corona electrostatic spraying; friction electrostatic spraying; electrostatic fluidized bed spraying; fluidized bed hot dip coating. | |
| Pinnoitteen paksuus: Käytä 40–150 mikronia, suositeltu kalvonpaksuus on 50–80 mikronia. | ||
| Kovettumisolosuhteet | 200℃/15 minutes is recommended, and it can also be designed according to user needs:180℃/15min etc. | |
For help with solutions customized to your business needs, contact Export Director now.
Export Director
With 20+ years of experience and We firmly believe that product quality is the basis of cooperation.
Send Inquiry
TEl
+86-21-6420 0566
