This series of products uses saturated polyester resin and TGIC curing agent as the main base material to make thermosetting powder coating.
Erilaisia ryppyjä, metallia, helmiäishohtoisia tehosteita ja sekavärejä jne.
Suitable for various long-term outdoor exposure product coating:
1. Kodinkoneet: outdoor units of air conditioners, indoor appliances and lamps with high lighting conditions;
2. Construction industry applications: colorful curtain walls, door and window frames, ceilings with high lighting conditions;
3. Traffic facilities: highway guardrails and grilles; 3. Auto parts, sports facilities, fitness equipment, gas station equipment, and courtyard facilities.
Carton packaging, lined with two layers of PVC plastic bags, net weight of each box is 20kg. Non-dangerous goods can be transported in various ways, but should be kept away from direct sunlight, moisture and heat, and contact with chemicals.
Operators should wear dust masks during use to avoid inhaling dust, and minimize long-term contact between skin and powder coating. Paint attached to the skin can be washed with soap.
| Tietty painovoima | 1.4~1.8g/cm” (depending on the formula and color) |
| Hiukkaskoko | Depending on the purpose, the standard type has an average particle size of 35~40 microns, less than 10 microns powder <10%, greater than 100 microns powder <0.5%. |
| Epävakaa aine | |
| Pehmenemispiste | 60~95℃ varies depending on the color gloss |
| Varastoinnin vakaus | Polyester/TGIC powder coatings should be stored in a dry, ventilated room below 35℃, and avoid direct sunlight. If stored in an air-conditioned room, the powder must be stored at room temperature or the same (temperature) as the spraying equipment before use to avoid moisture. Under this condition, the powder can be stably stored for 12 months. If it exceeds the period, it must be re-tested. If the result meets the requirements, it can still be used. Note: For low-temperature curing types and powders with a gloss of less than 40% (60″), the storage temperature should be below 30℃. |
| Testaa esineet | Tarkastusstandardi tai -menetelmä | Tarkastusindeksi |
| Esiintyminen | Silmämääräinen tarkastus | Erilaisia levypinnan tehosteita |
| Vaikutus | GB / T 1732 | ≥50 kg·cm |
| Taipuva | GB / T 6742 | ≤2mm |
| kuppaus | GB / T 9753 | ≥8mm |
| Kovuus | GB / T 6739 | ≥H~2H |
| kiinnittyminen | GB / T 9286 | Tasolla 0 |
| Neutraalin suolasumun kestävyys | GB / T 1771 | 500 h; Naarmuuntunut alue: yksisuuntainen ruoste ≤2.0 mm; Naarmuuntumaton alue: ei poikkeavuuksia |
| Kosteuden ja lämmönkestävyys | GB / T 1740 | 500 tuntia Ei poikkeavuuksia |
| Keinotekoinen sään ikääntymisen kestävyys | GB / T 1865 | 800 h; Värinmuutos ≤2 tasoa; Kiillon menetys ≤2 tasoa |
| Yllä olevat pinnoitteen suorituskykyindikaattorit voivat laskea hieman kiillon heikkenemisen myötä. | ||
| ruiskuttamalla | Tämä tuotesarja soveltuu seuraaviin ruiskutusmenetelmiin: koronasähköstaattinen ruiskutus; kitkasähköstaattinen ruiskutus; sähköstaattinen leijupetiruiskutus; leijupetikuumaskot. | |
| Pinnoitteen paksuus: Käytä 40–150 mikronia, suositeltu kalvonpaksuus on 50–80 mikronia. Keskimääräinen peittokyky: 10–12 neliömetriä/kg, kalvonpaksuus 60 mikronia (laskettu 100 %:n käyttöasteen perusteella) | ||
| Kovettumisolosuhteet | 200℃/10 minutes is recommended, and it can also be designed according to user needs: 160C/20 minutes, 180℃/10 minutes, etc. | |
For help with solutions customized to your business needs, contact Export Director now.
Export Director
With 20+ years of experience and We firmly believe that product quality is the basis of cooperation.
Send Inquiry
TEl
+86-21-6420 0566
