Revêtement en poudre de couleur grise froissée

Surface Finish Options Overview

COULEURS DISPONIBLES

RAL colors coating powder

Couleurs Pantone

Color-matching regarding customer requirement is available

PROPRIETES PHYSIQUES

Specific gravity :1.2 ~ 1.8g/cm3 up to colors

Particle size distribution:100% less than 100 microns (depending on the specific indicators art effects may be, according to the special requirements of painting adjusted)

Level of liquidity:24 ~ 27 mm

CONDITIONS DE DURCISSEMENT

180 °C ~ 200 °C (work piece temperature), 10-15 minutes

COUVERTURE MOYENNE

8-12 square meters / kg, thickness 60 microns (100% of the powder coating utilization rate)

EMBALLAGE

Carton extérieur doublé de deux couches de sacs en polyéthylène, contenant chacun un poids net de 20 kg.

STOCKAGE ET TRANSPORT

Stored in less than 30 °C, ventilated, dry, clean room, not near the fire source, heating, avoid direct sunlight, the product in the transport should be to prevent rain, sun, prolonged sun exposure.Storage products in line with the above conditions, since the date of production, effective storage period is 6 months.Over the storage period may be re-tested and the results were consistent with, can still be used.

SANTÉ ET SÉCURITÉ

Coating powder is a non-toxic products, but should be avoided in the course of inhalation of dust.Proposed operators wear appropriate dust mask, glasses.If possible, try to avoid long-term skin contact with powder coating