Revêtement en poudre pour matériaux de construction standard

Surface Finish Options Overview

Polyester resin and TGIC curing agent as the main raw materials.

Caractéristiques du revêtement :

Good adhesion, excellent mechanical properties, tough coating film.

Smooth and smooth film

Good Outdoor endurance

Excellent resistance to excessive baking

Application:

Suitable for various outdoor products such as: outdoor lighting, beach chair, solar water heater,

outdoor air conditioning unit, aluminum curtain wall, door and window frame, ceiling, highway guardrail, fence, sports facilities, communication equipment, etc

Paramètres de l'application :

Temps de durcissement

200°Cx10–15 mins

Recommended film thickness :

60-80 um

Méthode de pulvérisation :

high voltage electrostatic sprayin 60-80KV

MÉTHODE DE TEST STANDARD POUR ITEMIZER

In the above tests, 0.8mm cold rolled steel plates with oil and rust removal were used. The film thickness was 40 ~ 80um, and the performance index of the film would change slightly with different gloss.

Ce produit ne contient pas d'arsenic, de sélénium, de plomb, de chrome hexavalent, de mercure, d'antimoine, de cadmium et d'autres métaux lourds et répond aux exigences RoHS.

Storage conditions: dry at about 35C, stored in the ventilated room, avoid direct sunlight. Under these conditions, the powder can be stored for 12 months, product can still be used after re-examined to be in good condition even if it is found to be expired.

Note: All the test indicators mentioned in this report are the data obtained from laboratory tests for reference only and do not represent the performance. commitment of the product application.

Les résultats varient en fonction des facteurs environnementaux et d’autres conditions.