MT-OA010G is a polyester based powder coating, formulated without TGIC.
| Gemyske type | Polyester TGIC-free |
| Ferskining | Smooth Gloss |
| Grutte fan it dieltsje | Suitable for electrostatic spray |
| Spesifike swierte | 1.54-1.64 g/cm³ |
| Film dikte | 75 - 100 mikron |
| Coverage | 7.8 ㎡/kg @ 75 microns |
| Opslach | Dry cool conditions below 25°C (open boxes must be resealed) |
| Hâld it libben | 12 moannen |
| Stoving schedule (object temperature) | 10 minuten by 200 °C |
The results shown below are based on mechanical and chemical tests which (unless otherwise indicated) have been carried out under laboratory conditions and are given for guidance only. Actual product performance will depend upon the circumstances under which the product is used.
| Substrate | Kâld rôle stiel |
| Foarbehandeling | Lightweight Zinc phosphate |
| Film dikte | 70 - 80 mikron |
| Stovenskema | 10 minuten op 200 ° C. |
| toets | resultaten | |
| fleksibiliteit | ISO6860 | 5mm |
| Erichsen cupping | ISO1520 | 6mm |
| adhesion | ISO2409 | 100% |
| Impact (dir/rev) | ISO 6272 | 30/30 kgcm |
| Gloss(@60°） | ISO 2813 | > 90 |
| Hardness(Buchholz) | ISO2815 | > 80 |
| Reflektânsjeklasse | DIN EN 16268 | A |
Steel surfaces to be coated must be clean and free from grease, mill scale and rust. For maximum protection, it is essential to pre-treat components prior to the application of MT-OA010G. Iron phosphate and zinc phosphate pre-treatment of ferrous substrates improve corrosion resistance. Aluminium substrates may require a chromate conversion coating.
MT-OA010G can be applied using manual or automatic electrostatic spray equipment. It is recommended, that for consistent application and appearance, the product be fluidized during application. Unused powder can be reclaimed using suitable equipment and recycled through the coating system.
For help with solutions customized to your business needs, contact Export Director now.
Export Director
With 20+ years of experience and We firmly believe that product quality is the basis of cooperation.
Send Inquiry
TEl
+86-21-6420 0566
