MT-A1243 for brake components combines toughness and durability with excellent corrosion and chemical resistance. They also come in a range of colors to meet the varied design needs for brake pads, brake discs, calipers and other wheel hardware that is visible in an open wheel design.
| Gemyske Type | Epoksy |
| Area of usage | Remklauwen |
| Uterlik | Glad, glossy |
| Kleur | Antrasyt metallysk |
| Glans (60°) | 75 ± 5 GU |
| Dichte (g / cm3) | 1.55 0.05 ± |
| Stovenskema | 10 minutes at 180°C (time at object temperature) |
| Oanfraach | Elektrostatysk |
| Storage Stability | Under dry, cool (<25°C) conditions, at least 12 months from production date |
The results are based on mechanical and chemical tests which (unless otherwise indicated) have been carried out under laboratory conditions and are given for guidance only. Actual product performance will depend upon the circumstances under which the product is used.
| Substrate | Stielen panielen |
| Foarbehandeling | Bonder (WH/60/OC) iron phosphate |
| Film dikte | 70 μm |
| Genêzingsskema | 10 minuten op 180 ° C. |
| adhesion | DIN EN ISO 2409 | Gt 0 |
| Erichsen cupping | DIN EN ISO 1520 | ≥ 4 mm |
Steel surfaces to be coated must be clean and free from grease. For maximum protection it is essential to pre-treat components prior to the application of MT-A1243. Iron Phosphate and Zinc Phosphate of ferrous metals improve corrosion resistance.
MT-A1243 powders can be applied by manual or automatic electrostatic spray equipment. It is recommended that for consistent application and appearance product be fluidized during application. Unused powder can be reclaimed using suitable equipment and recycled through the coating system.
For help with solutions customized to your business needs, contact Export Director now.
Export Director
With 20+ years of experience and We firmly believe that product quality is the basis of cooperation.
Send Inquiry
TEl
+86-21-6420 0566
