This series of products uses saturated polyester resin and acrylic resin as the main base materials to make thermosetting powder coating.
1. Outdoor lamps;
2. Courtyard leisure facilities;
3. Building materials;
4. Aluminum ceilings and profiles;
5. Other outdoor low-gloss coatings.
Kartonferpakking, beklaaid mei twa lagen polyvinylchloride plestik tassen, nettogewicht fan elke doaze is 20 kg. Net-gefaarlike items kinne op ferskate manieren ferfierd wurde, mar moatte fuort hâlden wurde fan direkt sinneljocht, focht en waarmte, en kontakt mei gemikaliën.
Operators should wear dust masks during use to avoid inhaling dust and minimize long-term contact between skin and powder coating. Paint attached to the skin can be washed with soap.
| Spesifike swierte | 1.4~1.8g/cm’ (depending on the formula and color) |
| Grutte fan it dieltsje | Depending on the purpose, the standard type has an average particle size of 35~40 microns, less than 10 microns of powder <10%, more than 100 microns of powder <0.5%. |
| Storage stabiliteit | Outdoor matte powder coatings should be stored in a dry, ventilated room below 30°C, and avoid direct sunlight. If stored in an air-conditioned room, the powder must be stored at room temperature or the same (temperature) as the spraying equipment before use to avoid moisture. Under this condition, the powder can be stably stored for 6 months. If it exceeds the period, it must be re-tested. If the result meets the requirements, it can still be used. |
| Test items | Ynspeksjestandert of metoade | Inspection index |
| Ferskining | Ynspeksje op it each | Various board surface effects |
| Impact | GB / T 1732 | ≥50 kg·cm |
| Bûge | GB / T 6742 | ≤2mm |
| Cupping | GB / T 9753 | ≥8mm |
| hurdens | GB / T 6739 | ≥H~2H |
| adhesion | GB / T 9286 | Level 0 |
| Neutrale sâltsprayresistinsje | GB / T 1771 | 500o; Skreaun gebiet: unidireksjonele roest ≤2.0mm; Net-skreaun gebiet: gjin abnormaliteit |
| Focht- en waarmtebestriding | GB / T 1740 | 500o Gjin abnormaliteit |
| Keunstmjittige waarsferâlderingsresistinsje | GB / T 1865 | 800h; Discoloration ≤2 level; Gloss loss ≤2 level |
| The above coating performance indicators may decrease slightly as the gloss decreases. | ||
| Spuitjen | This series of products are suitable for the following spraying methods: corona electrostatic spraying; friction electrostatic spraying; electrostatic fluidized bed spraying; fluidized bed hot dip coating. | |
| Laachdikte: Brûk tusken 40~150 mikron, oanrikkemandearre filmdikte is 50~80 mikron. | ||
| Curing betingsten | 200℃/15 minutes is recommended, and it can also be designed according to user needs:180℃/15min etc. | |
For help with solutions customized to your business needs, contact Export Director now.
Export Director
With 20+ years of experience and We firmly believe that product quality is the basis of cooperation.
Send Inquiry
TEl
+86-21-6420 0566
