Acrylic transparent powder coating

Surface Finish Options Overview

produkt beskriuwing

This series of products is made of acrylic resin and hardener to produce transparent powder coating with high transparency and excellent leveling properties.

Produkteigenskippen

Excellent gloss and vividness, the coating is crystal clear;Excellent fluidity, the coating surface is smooth as a mirror;Excellent weather resistance in harsh outdoor environments, maintaining the original color of the coating;Good surface hardness and strong scratch resistance.

Applikaasje gebieten

1. Designed for automotive aluminum wheel surface finishing, and suitable as a high-performance finishing coating for various appliances, such as furniture metal tripods, bicycles, and door handles;

2. Suitable as a finishing protective layer for metal powder coatings.

Ferfier ferpakking

Kartonferpakking, beklaaid mei twa lagen polyvinylchloride plestik tassen, nettogewicht fan elke doaze is 20 kg. Net-gefaarlike items kinne op ferskate manieren ferfierd wurde, mar moatte fuort hâlden wurde fan direkt sinneljocht, focht en waarmte, en kontakt mei gemikaliën.

Hygiëne en feiligens

Operators should wear dust masks during use to avoid inhaling dust and minimize long-term contact between skin and powder coating. Paint attached to the skin can be washed with soap.

Poedereigenskippen

Spesifike swierte	1.0 ~ 1.5 g/cm
Grutte fan it dieltsje	Depending on the application
Storage stabiliteit	Acrylic transparent powder coating should be stored in a dry, ventilated room below 25℃, and avoid direct sunlight. If stored in an air-conditioned room, the powder must be stored at room temperature or the same temperature as the spraying equipment before use to avoid moisture. Under this condition, the powder can be stored stably for 12 months. If it is exceeded, it must be re-tested. If the result meets the requirements, it can still be used.

Coating eigenskippen

Test items	Ynspeksjestandert of metoade	Inspection index
Ferskining	Ynspeksje op it each	Various board surface effects
Impact	GB / T 1732	≥50 kg·cm
Bûge	GB / T 6742	≤2mm
Cupping	GB / T 9753	≥8mm
hurdens	GB / T 6739	≥H~2H
adhesion	GB / T 9286	Level 0
Neutrale sâltsprayresistinsje	GB / T 1771	500o; Skreaun gebiet: unidireksjonele roest ≤2.0mm; Net-skreaun gebiet: gjin abnormaliteit
Focht- en waarmtebestriding	GB / T 1740	500o Gjin abnormaliteit
Keunstmjittige waarsferâlderingsresistinsje	GB / T 1865	800h; Discoloration ≤2 level; Gloss loss ≤2 level
The above coating performance indicators may decrease slightly as the gloss decreases.