This series of products uses polyester resin and epoxy resin as the main base material to make thermosetting powder coating.
Various wrinkles, metal, pearlescent effects and mixed colors, etc.
Suitable for coating of various indoor products, widely used in any indoor purposes such as furniture, household appliances, industrial equipment, sports equipment, toys, hardware machinery, store shelves, lamps, etc.
Kartonferpakking, beklaaid mei twa lagen polyvinylchloride plestik tassen, nettogewicht fan elke doaze is 20 kg. Net-gefaarlike items kinne op ferskate manieren ferfierd wurde, mar moatte fuort hâlden wurde fan direkt sinneljocht, focht en waarmte, en kontakt mei gemikaliën.
Operators moatte stofmaskers drage tidens gebrûk om it ynademen fan stof te foarkommen en langduorjend kontakt tusken hûd en poeiercoating te minimalisearjen. Ferve dy't oan 'e hûd fêst sit, kin mei sjippe wosken wurde.
| Spesifike swierte | 1.4~1.8g/cm3 (depending on the formulation and color) |
| Grutte fan it dieltsje | Depending on the purpose, the standard type has an average particle size of 35~40 microns, less than 10 microns powder <10%, greater than 100 microns powder <0.5%. |
| Flechtige matearje | |
| Fersachtingspunt | 60~95℃ varies depending on the color gloss |
| Storage stabiliteit | Epoxy/polyester powder coatings should be stored in a dry, ventilated room below 35℃, and avoid direct sunlight. If stored in an air-conditioned room, the powder must be stored at room temperature or the same (temperature) as the spraying equipment before use to avoid moisture. Under this condition, the powder can be stored stably for 12 months. If it exceeds the period, it must be re-tested. If the result meets the requirements, it can still be used. Note: For low-temperature curing types and powders with a gloss of less than 40% (60°), the storage temperature should be below 30℃. |
| Test items | Ynspeksjestandert of metoade | Ynspeksje-yndeks |
| Ferskining | Ynspeksje op it each | Ferskate effekten fan it boerdoppervlak |
| Impact | GB / T 1732 | ≥50 kg·cm |
| Bûge | GB / T 6742 | ≤2mm |
| Cupping | GB / T 9753 | ≥8mm |
| hurdens | GB / T 6739 | ≥H~2H |
| adhesion | GB / T 9286 | Level 0 |
| Sâltspraybestindich | GB / T 1771 | 500o; Skreaun gebiet: unidireksjonele roest ≤2.0mm; Net-skreaun gebiet: gjin abnormaliteit |
| Focht- en waarmtebestriding | GB / T 1740 | 500o Gjin abnormaliteit |
| Photoaging | Poor light resistance, not recommended for outdoor use | |
| De boppesteande yndikatoaren foar coatingprestaasjes kinne wat ôfnimme as de glâns ôfnimt. | ||
| Spuitjen | Dizze searje produkten is geskikt foar de folgjende spuitmetoaden: korona-elektrostatysk spuiten; wriuwing-elektrostatysk spuiten; elektrostatysk fluidized bed spuiten; fluidized bed hjitte-dipcoating. | |
| Laachdikte: Brûk tusken 40~150 mikron, oanrikkemandearre filmdikte is 50~80 mikron. Gemiddelde dekking: 10~12 fjouwerkante meter/kg, filmdikte 60 mikron (berekkene op basis fan 100% gebrûksrate) | ||
| Curing betingsten | 200℃/10 minutes is recommended, and it can also be designed according to user needs: 140℃/30 minutes, 160℃/20分钟，180℃/10 minutes, etc. | |
For help with solutions customized to your business needs, contact Export Director now.
Export Director
With 20+ years of experience and We firmly believe that product quality is the basis of cooperation.
Send Inquiry
TEl
+86-21-6420 0566
