Anodisearre poeiercoating

Surface Finish Options Overview

It is suitable for anodic oxidation effect for product appearance, as well as environmental protection requirements such as Rohs and Reach.

Coating characteristics :

Good adhesion, excellent mechanical properties, tough coating film.

Coating film is Smooth and glossy

Good outdoor endurance

Uitstekende wjerstân tsjin oermjittich bakken

Oanfraach:

Suitable for a variety of products decoration and protection, such as: aluminum curtain wall, door and window frame, ceiling, etc

Spuitmetoade:

hege spanning elektrostatyske spuiten 60-80KV

Oanrikkemandearre filmdikte:

60-80 um

Applikaasje parameters

Hurdtiid

200Cx10–15mins

Standard Test Method For Itemizer

In the above tests, 0.8mm cold rolled steel plates with oil and rust removal were used. The film thickness was 40 ~ 80um, and the performance index of .the film would change slightly with different gloss.

Dit produkt befettet gjin arseen, selenium, lead, heksavalent chromium, kwik, antimoan, kadmium en oare swiere metalen, en foldocht oan de RoHS-easken.

Storage conditions: dry at about 35°C, stored in the ventilated room, avoid direct sunlight. Under these conditions, the powder can be stored for 12 months, product can still be used after re -examined to be in good condition even if it is found to be expired.

Opmerking: Alle testindikatoaren dy't yn dit rapport neamd wurde, binne de gegevens dy't allinich foar referinsje binne krigen út laboratoariumtests en fertsjintwurdigje net de prestaasjeferplichting fan 'e produktapplikaasje.

De resultaten fariearje ôfhinklik fan miljeufaktoaren en oare omstannichheden.