Our company’s aluminum wheel hub powder coating is a series of products specially designed for the characteristics of wheel hub bottom layer protection and surface glazing coating. It is a series of products with multiple varieties that are suitable for different requirements and coating characteristics. The product has excellent leveling, strong adhesion and good salt spray resistance.
Po transparente
High transparency pure polyester transparent powder
Ordinary transparency pure polyester transparent powder
Base powder
High leveling pure polyester base powder
High leveling epoxy polyester mixed base powder
Our company’s aluminum wheel hub powder coating is a series of products specially designed for the characteristics of wheel hub bottom layer protection and surface glazing coating. It is a series of products specially designed for different requirements and coating characteristics.
Embalaxe de cartón, forrada con dúas capas de bolsas de plástico de cloruro de polivinilo, cun peso neto de cada caixa de 20 kg. Os artigos non perigosos pódense transportar de varias maneiras, pero deben evitarse da luz solar directa, da humidade e da calor e do contacto con produtos químicos.
Os operadores deben usar máscaras antipo durante o uso para evitar a inhalación de po e minimizar o contacto a longo prazo entre a pel e o revestimento en po. A pintura adherida á pel pódese lavar con xabón.
| características | The product has excellent leveling, strong adhesion and good salt spray resistance. |
| Gravidade específica | 1.2~1.8g/cm’ (depending on the formula and color) |
| tamaño de partícula | Dependendo do propósito, o tipo estándar ten un tamaño medio de partícula de 35~40 micras, menos de 10 micras de po <10% e máis de 100 micras de po <0.5%. |
| Estabilidade de almacenamento | Powder coatings for aluminum wheels should be stored in a dry and ventilated room below 35°C, and avoid direct sunlight. If stored in an air-conditioned room, the powder must be stored at room temperature or the same (temperature) as the spraying equipment before use to avoid moisture. Under this condition, the powder can be stably stored for 12 months. If it is exceeded, it must be re-tested. If the result meets the requirements, it can still be used. |
Po transparente
| Elementos de proba | Norma ou método de inspección | Índice de inspección |
| Aparencia | Inspección visual | Varios efectos de superficie da placa |
| Impacto | GB / T 1732 | ≥50 kg·cm |
| Dobrar | GB / T 6742 | ≤ 2mm |
| Ventilación | GB / T 9753 | ≥6mm |
| Dureza | GB / T 6739 | ≥H |
| adhesión | GB / T 9286 | Nivel 0 |
| Resistencia neutra á pulverización salina | GB / T 1771 | 800 h; Área rexistrada: ferruxe unidireccional ≤2.0 mm; Área non rexistrada: sen anomalías |
Base powder
| Elementos de proba | Norma ou método de inspección | Índice de inspección |
| Impacto | GB / T 1732 | ≥50 kg·cm |
| Dobrar | GB / T 6742 | ≤ 2mm |
| Ventilación | GB / T 9753 | ≥6mm |
| Dureza | GB / T 6739 | ≥H |
| adhesión | GB / T 9286 | Nivel 0 |
| Resistencia neutra á pulverización salina | GB / T 1771 | 800 h; Área rexistrada: ferruxe unidireccional ≤2.0 mm; Área non rexistrada: sen anomalías |
| Condicións de curado | Recommendation: acrylic transparent powder 180℃/10mins, pure polyester transparent powder 200℃/10mins or low temperature curing 180℃10mins, base powder 180℃/10mims. | |
For help with solutions customized to your business needs, contact Export Director now.
Export Director
With 20+ years of experience and We firmly believe that product quality is the basis of cooperation.
Send Inquiry
TEl
+86-21-6420 0566
