Acrylic transparent powder coating

Surface Finish Options Overview

Descrición do produto

This series of products is made of acrylic resin and hardener to produce transparent powder coating with high transparency and excellent leveling properties.

As características do produto

Excellent gloss and vividness, the coating is crystal clear;Excellent fluidity, the coating surface is smooth as a mirror;Excellent weather resistance in harsh outdoor environments, maintaining the original color of the coating;Good surface hardness and strong scratch resistance.

As áreas de aplicación

1. Designed for automotive aluminum wheel surface finishing, and suitable as a high-performance finishing coating for various appliances, such as furniture metal tripods, bicycles, and door handles;

2. Suitable as a finishing protective layer for metal powder coatings.

Embalaxe de transporte

Carton packaging, lined with two layers of polyvinyl chloride plastic bags, net weight of each box is 20kg. Non-hazardous items can be transported in various ways, but should be kept away from direct sunlight, moisture and heat, and contact with chemicals.

Hixiene e seguridade

Os operadores deben usar máscaras antipo durante o uso para evitar a inhalación de po e minimizar o contacto a longo prazo entre a pel e o revestimento en po. A pintura adherida á pel pódese lavar con xabón.

Propiedades do po

Gravidade específica	1.0 ~ 1.5 g/cm
tamaño de partícula	Depending on the application
Estabilidade de almacenamento	Acrylic transparent powder coating should be stored in a dry, ventilated room below 25℃, and avoid direct sunlight. If stored in an air-conditioned room, the powder must be stored at room temperature or the same temperature as the spraying equipment before use to avoid moisture. Under this condition, the powder can be stored stably for 12 months. If it is exceeded, it must be re-tested. If the result meets the requirements, it can still be used.

Propiedades do revestimento

Elementos de proba	Norma ou método de inspección	Índice de inspección
Aparencia	Inspección visual	Varios efectos de superficie da placa
Impacto	GB / T 1732	≥50 kg·cm
Dobrar	GB / T 6742	≤ 2mm
Ventilación	GB / T 9753	≥8mm
Dureza	GB / T 6739	≥H~2H
adhesión	GB / T 9286	Nivel 0
Resistencia neutra á pulverización salina	GB / T 1771	500 h; Área rexistrada: ferruxe unidireccional ≤2.0 mm; Área non rexistrada: sen anomalías
Resistencia á humidade e á calor	GB / T 1740	500 h Sen anomalías
Resistencia artificial ao envellecemento atmosférico	GB / T 1865	800 h; Decoloración ≤2 nivel; Perda de brillo ≤2 nivel
Os indicadores de rendemento do revestimento anteriores poden diminuír lixeiramente a medida que diminúe o brillo.