MT-A1242 powder coating has an excellent line of coatings for coil springs, and torsion bars essential to the safe performance and comfortable ride of today’s car and truck chassis systems. MT-A1242’s single layer systems offer unyielding performance in corrosion and chip resistance balanced with excellent application efficiencies. Our patented Super Single Coat for coil springs offers superior corrosion protection and critical chip resistance to bring you the most economical and responsible choices in coatings for high performance, high tensile springs.
| Jenis Kimia | Epoxy |
| Area penggunaan | Automotive suspension springs |
| Penampilan | Halus |
| Tingkat kilap (60°) | >40 GU |
| Warna | Black |
| Ketebalan Film yang Direkomendasikan | 330 – 380 µm (13 – 15 mils) |
| Densitas (g / cm3) | 1.41 ± 0.05 (calculated) 0.9 – 1.2 (measured, cured film) |
| Gel time (at 200 °C) | 36 – 54sec |
| Aplikasi | Elektrostatik |
| Storage | Under dry, cool (<21°C) conditions |
| Kehidupan rak | 10 bulan dari tanggal produksi |
| Jadwal penyembuhan (pada suhu objek) | 25 menit pada suhu 150°C (waktu pada suhu objek) 25 minutes at 300°F (time at object temperature) |
| Adhesi | ISO 2409 | GT0 |
| Kekerasan Pensil | TSH1539G | B |
| Bekam Erichsen | ISO 1520 | 8 mm |
| Ketahanan dampak | ISO 6272 | ≥ 140 ip (langsung) ≥ 140 ip (reverse) |
Testing has been determined under laboratory conditions using the following application properties and is for guidance only.
| Substrat | Steel panels CRS ACT B958 P90 |
| Pretreatment | Seng Fosfat |
| Ketebalan film | 330 – 380 µ (13 – 15 mils) |
| Jadwal penyembuhan | 20 menit pada 160 ° C |
Actual film performance will depend on the individiual circumstances in which the product is used.
Steel surfaces to be coated must be clean and free from grease. For maximum protection it is essential to pre-treat components prior to the application of MT-A1242. Iron Phosphate and Zinc Phosphate of ferrous metals improve corrosion resistance.
Serbuk MT-A1242 dapat diaplikasikan dengan alat semprot elektrostatik manual maupun otomatis. Untuk aplikasi yang konsisten dan tampilan yang menarik, disarankan untuk melakukan fluidisasi produk selama aplikasi. Serbuk yang tidak terpakai dapat didaur ulang menggunakan peralatan yang sesuai dan didaur ulang melalui sistem pelapisan.
For help with solutions customized to your business needs, contact Export Director now.
Export Director
With 20+ years of experience and We firmly believe that product quality is the basis of cooperation.
Send Inquiry
TEl
+86-21-6420 0566
