| Uraian Teknis | Lapisan serbuk | |
| Nama lain | Powder paint,Electrostatic powder coating, thermosetting powder coating | |
| Tipe | Epoxy polyester resin series | |
| Bahan utama | Epoxy resin,polyester resin, and hardner | |
| Keuntungan | Good adhesion,good mechanical property,strong coating film, | |
| excellent insulation,anticorrosion,energy-efficient,convenient operation. | ||
| aplikasi Lapangan | Apply to indoor use | |
| Household appliance:air conditioner indoor unit,fan,radiator, | ||
| kettle,lighting sets, refrigerator,TV set,kitchen ventilator, | ||
| disinfection cabinet,electric cooker,etc. | ||
| Daily use:Knife,fork,crafts,ornament,etc. | ||
| Indoor furniture:table,chair,cupboard, | ||
| safe,carved iron bed,door,curtain,etc. | ||
| Kondisi Aplikasi | Electrostatic spray/Triboelectric gun spray. | |
| Recommended curing condition:190℃/15min | ||
| (object surface temperature),range from 190 degree centigrade | ||
| for 20 minutes to 210 degree centigrade for 8minutes. | ||
| Recommended film thickness:50~80um, range from 40~150um | ||
| Sifat fisik | Berat jenis | 1.4~1.8g/cm3 as per formula and color |
| ukuran partikel | average 35~40um | |
| Tes kondisi | Substrat | 0.5mm thickness cold rolled steel sheet |
| Pretreatment | Remove rust and grease | |
| Ketebalan film | 50 ~ 80um | |
| Menyembuhkan suhu | 190℃/15 menit | |
| Properti mekanik | Kekerasan pensil | ISO 15184-1998:Null |
| Adhesion (by griding) | GB/T 9286-1998:≤2 grade | |
| Tes dampak | GB/T 1732-1993:≥25 kg.cm | |
| Uji tekuk | GB/T 6742 :≤4mm | |
| Tes bekam | GB/T 9753:Null | |
| Chemical and Durability Test | Tes semprotan garam | GB/T 1771.≥500 hours,no obvious change , |
| crossion width at cross≤2mm | ||
| Tes kelembaban | GB/T 1740.≥500 hours,no change | |
| Paket | Inside by PE bag,outside by carton,net weight 25kg/carton | |
| Kondisi penyimpanan | Store in dry ventilated room,temperature under 35 degree centigrade, | |
| hindari sinar matahari langsung. | ||
| Shelf Life | Enam bulan | |
| Health and Safty | Raw material of powder coating don’t contain toxic substance, | |
| no toxic gas produced during curing.Please wear dust mask in operation | ||
| to avoid inhelation of powder.Please avoide prolonged skin contact | ||
| with powder,wash out powder with soap and water. | ||
For help with solutions customized to your business needs, contact Export Director now.
Export Director
With 20+ years of experience and We firmly believe that product quality is the basis of cooperation.
Send Inquiry
TEl
+86-21-6420 0566
