Pelapis Serbuk Anti-Korosi Epoxy untuk Pipa Air Minum yang Aman

Surface Finish Options Overview

Produk Pendahuluan:
This product is formulated using special epoxy resin, dedicated curing agents, nano-grade antimicrobial agents, and food-grade pigments and fillers. It features high reactivity, strong adhesion, high cross-link density, and excellent resistance to chemicals, solvents, cathodic disbondment, as well as superior and durable antimicrobial effects, flexibility, and impact resistance.

Penggunaan Produk:
Suitable for municipal drinking water supply pipes.

Fitur Produk:

Daya rekat yang sangat baik pada substrat.Good leveling and high gloss on the coating surface.Ketahanan yang kuat terhadap permeasi dan korosi.High surface hardness and dense coating.Ketahanan pelepasan katodik suhu tinggi yang unggul.Good mechanical properties and extremely strong flexibility.Low melting temperature, high reactivity, and high curing completion rate.The product has passed the EU WRAS water safety certification and meets the safety evaluation standards for materials in contact with drinking water.

Kinerja Serbuk:

Milik	Spesifikasi	Catatan
Kekuatan Mekanik	High	Ensures durability and resistance to mechanical stress
Penyusutan	Rendah	Minimizes dimensional changes during curing, maintaining precision
Memproses Kinerja	Excellent dispersibility and lubricity	Facilitates smooth molding and reduces wear on molds
Properti Listrik	High glass transition temperature, wide operating temperature range	Ensures stable performance across a broad temperature spectrum
Properti Dielektrik	Ketahanan kimia dan pelarut yang sangat baik	Protects against degradation from chemical exposure
Kinerja lingkungan	100% solid content, no harmful substances	Complies with environmental regulations and promotes sustainability

Kondisi Penyembuhan:

Milik	Spesifikasi	Catatan
Suhu	Referenced to workpiece temperature	Deviations may affect performance; ensure accurate temperature control for optimal results

Parameter Aplikasi:

Parameter	Spesifikasi	Catatan
Peralatan yang Berlaku	Frictional charging spray, corona electrostatic spray, dip coating, roll coating
Ketebalan Film	200-600um	Dapat disesuaikan sesuai dengan kebutuhan benda kerja

Kesehatan dan Keselamatan:

Milik	Spesifikasi	Catatan
Toksisitas	Tak beracun	Aman untuk penanganan dan aplikasi
mudah terbakar	Tidak mudah terbakar	Mengurangi risiko dalam penyimpanan dan penggunaan
Regulasi	GB15607-1995	Ikuti protokol keselamatan untuk operasi pelapisan

Kewaspadaan:

Barang	Spesifikasi	Catatan
Penggunaan di luar ruangan	Tidak direkomendasikan	Dapat menyebabkan pemudaran dan pengapuran
Persiapan Permukaan	Bebas minyak, bebas air, perawatan permukaan pada level Sa21/2 (GB/T8923), kedalaman pola jangkar 40-100um, permukaan bersih dari debu dan abrasif
Pemanasan awal	Temperature controlled between 180-230°C
Storage	Ventilated, dry, below 30°C, away from heat sources, corrosive chemicals, and solvents, avoid strong light, maximum stack height 5 layers, avoid long-term pressure, keep packaging sealed	Ensures product stability and prevents degradation
Menyembuhkan Suhu	Panaskan permukaan pipa baja hingga di atas 200°C untuk tingkat penyelesaian penyembuhan yang lebih baik
Mencampur Bubuk	Do not mix with other anti-corrosion powders or recycled powders. Thoroughly clean the spraying equipment when changing colors to ensure drinking water safety and meet EU WRAS water safety standards
Pemenuhan	Meets EU WRAS water safety standards