Pelapis bubuk polivinil asetat

Surface Finish Options Overview

Deskripsi singkat

It is made of German and multi-head trees and chemicals such as TGIC or HAA.

Fitur

Excellent mechanical properties and excellent weather resistance.

Area aplikasi

Applicable to various types of long-term outdoor exposure products such as communication base stations, mechanical equipment, household appliances, architectural aluminum profiles, transportation facilities, stadium facilities, courtyard facilities, etc.

Seri Produk

Provide standard weather resistance and ultra-high weather resistance products; can be made into a variety of gloss and a variety of colors; can be made into flat, sandy, wrinkled, metallic effects and mixed colors; some products are certified by Qualicoat Classl.

Teknis parameter

Kinerja bubuk

Berat jenis: 1.1~1.8g/cm³

Peralatan mekanis

item tes	Standar uji	Indikator kinerja
Kekerasan pensil	GB / T6739-1996	>=H
Adhesi	GB / T9286-1998	Kelas 0
Bending	GB6742-86	Φ3mm
Dampak	GB / T1732-93	50kg.cm
Bekam	GB9753-88	> 6mm

Tahan korosi

item tes	Standar uji	Indikator kinerja
Ketahanan terhadap semprotan garam	GB / T1771-91	No change in coating after 1000 hours, Cross-section single-sided corrosion <2mm
​Moisture and heat resistance	GB / T1740-79	>1000 hours slight loss of gloss, >=1 level
Light aging test ASTM G154 QUV 0.78w/m² @340nm 500H		Gloss retention ≥80%

Note: The above parameters are laboratory data and are for reference only. The actual indicators are related to factors such as customer environment, equipment, materials, pretreatment, and spraying process.

Kondisi aplikasi

Pretreatment: phosphating treatment, inscription treatment; Coating: Polyester powder coating is suitable for the following equipment coating: corona electrostatic spraying, friction electrostatic spraying, electrostatic fluidized bed spraying. Curing conditions: 200·C@10 minutes, 1800C@15 minutes, can also be designed according to customer needs.

Pengemasan

Kemasan karton.

Berat bersih 20kg/kotak.

Dilapisi dengan kantong plastik polietilena.

Kondisi penyimpanan

Simpan di ruangan kering dan berventilasi di bawah 30℃.

Hindari sinar matahari langsung.

Dalam kondisi ini, serbuk dapat disimpan secara stabil selama 12 bulan.

Can be retested after expiration, and can still be used if it meets the requirements.

Keamanan dan kesehatan

All raw materials of powder coatings do not contain toxic substances.No toxic gas will be released during baking.Avoid inhalation of dust during use.Operators should wear dust masks.Minimize long-term contact between skin and powder.Paint attached to the skin can be washed with soap.