MT-D3020 is a series of hyperdurable powder coatings designed to meet the most demanding architectural specification requirements in the world. MT-D3020 is also designed to provide excellent cosmetic and functional protection whilst exploiting the recognized benefits of powder coatings complying with Qualicoat Class 3 and AAMA2605 and EN12206 specifications.
| 전형적인 가치 | |
| 화학물질 종류 | 불소 중합체 |
| 외관 | 부드러운 매트 |
| 밀도 | 1.2 – 1.7 g/cm³, depending on colour |
| 광택(60°) | 15 – 30 구 |
| 입자 크기 분포 | Suitable for electrostatic spray. |
| 유통 기한 | 25°C 이하에서 18개월 |
| 저장 조건 | 건조하고 시원한(≤ 25°C) 환경에서 보관하세요(열린 상자는 다시 밀봉해야 함) |
| 경화 일정 | 20 – 35 min at 190°C 15 – 25 min at 200°C 10- 15 min at 210°C (object temperature) |
Aluminium components should receive a full multi-stage chromate conversion coating or suitable chrome-free pre-treatment or suitable pre-anodising to clean and condition the substrate. Detailed advice should be sought from the pre-treatment supplier. For maximum protection it is essential to pre-treat components prior to the application of them in accordance with the MT-D Approved Applicator Manual.
Powders can be applied by manual or automatic electrostatic spray equipment. All powders can show small color differences from batch to batch, this is normal and unavoidable. Bonded products have better application properties than blended products (more stable) but attention should still be paid to line settings in order to avoid “marble effect” and changes in aspect after recycling. Products with different codes should not be mixed even if same colour and gloss. Applicators and fabricators are advised to use a single batch for parts that will be assembled together. Differences are more likely with special effect powders. For more information, it is suggested to read the Metallic Applications Guidelines.
결과는 (별도로 명시되지 않는 한) 실험실 조건에서 수행된 기계적 및 화학적 테스트를 기반으로 하며 참고용으로만 제공됩니다. 테스트는 다음의 적용 특성을 사용하여 실험실 조건에서 결정되었으며 참고용으로만 제공됩니다.
| 전처리 | Chrome free Qualicoat/GSB approved pretreatment |
| 기판 | Aluminum (0.5-0.8 mm Al Mg1) |
| 경화 일정 | 200°C(물체 온도)에서 20분 |
| 도막 두께 | 50 – 80µm, ISO 2360 |
| 전형적인 가치 | 방법/표준 | |
| 부착 | 클래스 0 | ISO 2409 (2 mm Crosshatch |
| 에릭슨 커핑 | Pass Qualicoat class 3 requirements | ISO 1520 |
| 유연성 | Pass Qualicoat class 3 requirements | ISO 1519 |
| 내 충격성 | Pass Qualicoat class 3 requirements | ISO 6272-2(d/r) |
For help with solutions customized to your business needs, contact Export Director now.
Export Director
With 20+ years of experience and We firmly believe that product quality is the basis of cooperation.
Send Inquiry
TEl
+86-21-6420 0566
