MT-600 AM is a series of polyester based powder coatings, formulated with the use of TGIC, designed for the exterior environment, offering the benefits of MT- 600 in combination with specific antimicrobial activity. MT- 600 AM powders are available in a wide range of colours in gloss, satin, matt, metallic and textured effects and can be custom matched to the user’s requirements.
| Mtundu wa mankhwala | Polyester – TGIC |
| Kukula kwamitundu | Oyenera kutsitsi electrostatic |
| Mphamvu yapadera | 1.2-1.8 g/cm³ depending on colour |
| mtundu | Grey |
| yosungirako | Zouma zozizira zosakwana 25 ° C (mabokosi otseguka ayenera kutsekedwanso) |
| Zosungira moyo | miyezi 12 |
| Stoving schedule (object temperature) | Mphindi 15 pa 190 ° C Mphindi 10 pa 200 ° C Mphindi 8 pa 210 ° C |
| kusinthasintha | ISO 6860 (Conical Mandrel) | Pafupi 3 mm |
| guluu wolimba | ISO 2409 (2mm Crosshatch) | gt0 ku |
| Erichsen Cupping | ISO 1520 | Pafupi 7 mm |
| kuuma | ISO 1518 (2000g) | Pass – no penetration to substrate |
| Zotsatira | ISO 6272 | 50 kgcm |
| Mchere wa Mchere | ISO 7253 (250 hours) | Pass – no corrosion creep more than 2mm from scribe |
| Cyclic Humidity | ISO 6270-1 (1000 hours) | Pass – no blistering or loss of gloss |
| Distilled Water Immersion | ISO 2812 (240 hours) | Pass – no blistering or loss of gloss |
| Exterior Durability | Excellent – non chalking, slight loss of gloss after 12 months continuous exposure but no film breakdown or reduction in protective properties | |
| Kukaniza Chemical | Generally excellent resistance to most acids, alkalis and oils at normal temperatures | |
| Colour Stability at Elevated temperatures | Excellent for continuous exposure up to 150°C. | |
Aluminium, steel or Zintec surfaces to be coated must be clean and free from grease. Iron phosphate and particularly lightweight zinc phosphating of ferrous metals improves corrosion resistance. Aluminium substrates may require a chromate conversion coating.
MT-600 AM powders can be applied by manual or automatic electrostatic spray equipment. Unused powder can be reclaimed using suitable equipment and recycled through the coating system.
For help with solutions customized to your business needs, contact Export Director now.
Export Director
With 20+ years of experience and We firmly believe that product quality is the basis of cooperation.
Send Inquiry
TEl
+86-21-6420 0566
